KARAKTERISTIK DINAMIK ROTOR BOW THRUSTER 250 KW MENGGUNAKAN PEMODELAN EULER-BERNOULLI BEAM

Authors

  • Harry Purnama Pusat Teknologi Industri Permesinan, Deputi Bidang TIRBR, BPPT
  • Budi Noviantoro Fadjrin Pusat Teknologi Industri Permesinan, Deputi Bidang TIRBR, BPPT.
  • Muhammad Ilham Adynugraha Laboratorium Design Institute, PTIP
  • Cuk Supriyadi Ali Nandar Laboratorium Design Institute, PTIP

DOI:

https://doi.org/10.29122/mipi.v13i1.3128

Keywords:

Rotor Dynamic, Euler-Bernoulli Beam, Shaft, Critical Speed, Mode Shape.

Abstract

Abstrak

 

Perkembangan mesin-mesin elektrik terutama Bow Thruster bagi sektor kemaritiman sangat signifikan. Dari beberapa komponen penting dalam Bow Thruster, rotor terutama poros dan bantalan bearing mempunyai peran penting sehingga  perlu dilakukan analisa. Analisa dinamik merupakan analisa untuk mengetahui sifat-sifat dinamik rotor akibat pengaruh putaran terhadap frekuensi pribadi. Pada makalah ini analisa dinamik dikembangkan dengan pemodelan rotor menggunakan Euler-Bernoulli Beam (EBB). Hasil dari analisa dinamik rotor ini menunjukan putaran kritis dan modus getar dari rotor Bow Thruster.

 

Kata kunci : Rotordinamik, Euler-Bernoilli Beam, Poros, Putaran Kritis, Modus Getar.

 

Abstract

The development of electric machines, especially Bow Thruster, for the maritime sector is significantly increased. The several important components in Bow Thruster, rotors, especially shaft and bearings, have an important role to analyzed. Dynamic analysis is an analysis to determine the dynamic properties of rotors due to the effect of rotation on natural frequency. In this paper a dynamic analysis, rotor modeling was developed using Euler-Bernoulli Beam (EBB). The results of this rotor dynamic analysis show the critical speed and mode shapes of the Bow Thruster rotor.

 

References

Boy, F., & Hetzler, H. Nonlinear

Electromechanical Interactions in

Rotordynamics of Electrical Machines.

Zohoor, H., Kakavand, F. Vibration of

Euler–Bernoulli and Timoshenko beams

in large overall motion on flying support

using finite element method. Scientia

Iranica, 19(4), 1105-1116. 2012.

Matsushita, O., Tanaka, M., Kanki, H.,

Kobayashi, M., & Keogh, P. Vibrations

of Rotating Machinery. Springer. 2017.

Cavalini Jr, A. A., Guimarães, T. A., da

Silva, B. R., & Steffen Jr, V. Analysis of

the Dynamic Behavior of a Rotating

Composite Hollow Shaft. Latin American

Journal of Solids and Structures 14(1),

-16. 2017

Falsone, G., & Settineri, D. A Euler–

Bernoulli-like Finite Element Method for

Timoshenko Beams. Mechanics

Research Communications, 38(1), 12-

2011.

Ahmed, K. S., & Ahmad, S. M. Vibron

Rotor, an Open source Rotor dynamic

Code: Development and Benchmarking

Measurement, 131, 546-558. 2019.

Genta, G., & Silvagni, M. On Centrifugal

Softening in Finite Element Method

Rotordynamics. Journal of Applied

Mechanics, 81(1), 011001. 2014.

Haji, Z. Dynamic Analysis and Crack

Detection in Stationary and Rotating

Shafts (Doctoral dissertation, The

University of Manchester). 2015.

Friswell, M. I., Penny, J. E., Garvey, S.

D., & Lees, A. W. Dynamics of Rotating

Machines. Cambridge University Press.

Bang, H., & Kwon, Y. W. The Finite

Element Method Using MATLAB. CRC

press. 2000.

Dewi, D.K., & Widodo, A. Desain dan

Rekayasa Turbin Panas Bumi Tipe

Kondensing Kapasitas 5 MW, Laporan

akhir Insinas 2016, Ristek Dikti. 2016.

Noviyantoro Fadjrin, Budi & Purnama,

Harry & I Adhynugraha, Muhammad &

Nandar, Cuk. Shaft Mechanical Design

of 250 kW Electric Motor. 309-314.

1109/ICECOS.2018.8605227. 2018.

Downloads

Published

13-09-2023

How to Cite

Harry Purnama, Budi Noviantoro Fadjrin, Muhammad Ilham Adynugraha, & Cuk Supriyadi Ali Nandar. (2023). KARAKTERISTIK DINAMIK ROTOR BOW THRUSTER 250 KW MENGGUNAKAN PEMODELAN EULER-BERNOULLI BEAM. Majalah Ilmiah Pengkajian Industri; Journal of Industrial Research and Innovation, 13(1), 1–8. https://doi.org/10.29122/mipi.v13i1.3128