Analyzing The Total Resistance and Wave Pattern of Modification Hull Form Design Catamaran Fishing Vessel
Main Article Content
Abstract
Indonesia is located between the Pacific Ocean and the Indian Ocean. In addition, Indonesia is a maritime country, with data stating that Indonesia’s sea proportion is 64.97% of the total territory of Indonesia. Diverse marine resources exist in Indonesia, and the country produces 8.02 million tons of fish annually. In Indonesia, the traditional fishing vessel serves as both a mode of transportation and an element of livelihood. It was built using techniques passed down from generation to generation. Therefore, it is necessary to investigate the fishing vessels in order to determine their resistance profile and wave pattern. This analysis is done to take the catamaran-hull fishing vessel design into reference. The performance of ship design can be quickly predicted using a computational approach. The Slender Body approach and Savitsky's mathematical model are used to investigate the resistance analysis. The primary method used to describe the efficacy of the methodology is study comparison. This research will discuss the three variations of the fishing vessel design.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Afdhal, M. Ikbal, Untung Budiarto, and Pujo Mulyatno. 2019. “Optimasi Disain Spread Mooring Dengan Konfigurasi Variasi Line Terhadap Six Degrees Of Freedom (DOF) Olah Gerak Pada Kapal Floating Storage And Offloading (FSO).” Jurnal Teknik Perkapalan 7(1).
Aldias Bahatmaka, Muhammad Yusuf Wibowo, Andi Abdullah Ghyfery, Muhammad Harits, Samsudin Anis, Deni Fajar Fitriyana, Rizqi Fitri Naryanto, Andri Setiyawan, Rizki Setiadi, Aditya Rio Prabowo, and Kim Dong Joon. 2023. “Numerical Approach of Fishing Vessel Hull Form to Measure Resistance Profile and Wave Pattern of Mono-Hull Design.” Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 104(1):1–11. doi: 10.37934/arfmts.104.1.111.
ANANTA, MUHAMMAD IQBAL FIRDIAN. 2022. “ESTIMASI KEBUTUHAN MATERIAL DAN JAM ORANG PADA PEMBANGUNAN KAPAL CATAMARAN 9 M (FRP) DI CV. JAVANESE BOAT INDONESIA.”
Bahatmaka, Aldias, and Dong-Joon Kim. 2019. “NUMERICAL APPROACH FOR THE TRADITIONAL FISHING VESSEL ANALYSIS OF RESISTANCE BY CFD.” Journal of Engineering Science and Technology 14(1):207–17.
Iqbal, Muhammad, Parlindungan Manik, Sasmito Hadi, and Achmad Kurniawan. 2020. “PENGARUH POSISI CENTERBULB BERBENTUK FOIL TERHADAP KOMPONEN HAMBATAN KAPAL IKAN KATAMARAN MV. LAGANBAR.” Jurnal Integrasi 12(1):64–71.
ITTC, 1975. International Towing Tank Conference, Ottawa: ITTC.
Julianto, Rizki Ispramudita, Teguh Muttaqie, Ristiyanto Adiputra, Syamsul Hadi, Raymundus Lullus Lambang Govinda Hidajata, and Aditya Rio Prabowo. 2020. “Hydrodynamic and Structural Investigations of Catamaran Design.” Pp. 93–100 in Procedia Structural Integrity. Vol. 27. Elsevier B.V.
Matafi, S. D. H. V. P. F., 2015. Simulasi Pengaruh Trim terhadap Stabilitas Kapal Purse Seine. Jurnal Ilmu dan Teknologi Perikanan Tangkap 2, 13–18., pp. 13-18.
Michael, Jeriko Siagian Gunadi, Ahmad Fauzan Zakki, and Muhammad Iqbal. 2020. “Kajian Kekuatan Struktur Dan Buckling Pada Livestock Carrier Catamaran 1500 DWT Dengan Metode Elemen Hingga.” Jurnal Teknik Perkapalan 8(3):360–67.
M., 2023. EBSFM UNHAS. [Online]
Available at: https://www.ebsfmunhas.com/marine-innovation-festival-indonesia-2023/.
Ngurah, Gusti, Agung Yogiswara, and I. Ketut Sutrisna. 2021. “PENGARUH PERUBAHAN IKLIM TERHADAP HASIL PRODUKSI IKAN DI KABUPATEN BADUNG.” E-Jurnal Ekonomi Pembangunan Universitas Udayana 10(9):3613–43.
Poundra, G. U. I. H. D. S. B., 2017. Optimizing trimaran yacht hull configuration based on resistance and seakeeping criteria. Procedia Eng. 194, pp. 112-119.
Pratama, Angga Sifta, Aditya Rio Prabowo, Tuswan Tuswan, Ristiyanto Adiputra, Nurul Muhayat, Bo Cao, Syamsul Hadi, and Indri Yaningsih. 2023. “FAST PATROL BOAT HULL DESIGN CONCEPTS ON HYDRODYNAMIC PERFORMANCES AND SURVIVABILITY EVALUATION.” Journal of Applied Engineering Science 21(2):501–31. doi: 10.5937/jaes0-40698.
Qin, L. Z. X. G. Y. C. P. Q. J. L. Z., 2021. Shaft Power Measurement for Marine Propulsion System Based on Magnetic Resonances. IEICE Electron. Express 9, pp. 50-62.
Raj, Rishav. 2019. “Ship Resistance Prediction Using Artificial Neural Networks.” Pp. 100–103 in 6th International Conference on Ship and Offshore Technology-India.
Sasvia, Hayyu. 2019. “Penegakan Hukum Perikanan Di Wilayah Laut Indonesia.” Lex Scientia Law Review 3(2):227–34.
Shi, Guangyu, Alexandros Priftis, Yan Xing-Kaeding, Evangelos Boulougouris, Apostolos D. Papanikolaou, Haibin Wang, and Geoff Symonds. 2021. “Numerical Investigation of the Resistance of a Zero-Emission Full-Scale Fast Catamaran in Shallow Water.” Journal of Marine Science and Engineering 9(6). doi: 10.3390/jmse9060563.
Zeng, Qingsong, Robert Hekkenberg, and Cornel Thill. 2019. “On the Viscous Resistance of Ships Sailing in Shallow Water.” Ocean Engineering 190:106434. doi: https://doi.org/10.1016/j.oceaneng.2019.106434