OXIDE LAYER CHARACTERIZATION OF AlMg2 CLADDING OF IRRADIATED U3Si2/Al FUEL WITH 4.8 gU/cm3 DENSITY

Abstract

To investigate the performance of AlMg2 cladding in the U₃Si₂/Al dispersion fuel, oxide layer characterization of AlMg2 cladding of the irradiated U₃Si₂/Al fuel with 4.8 gU/cm3 density was conducted. The oxide layer on the surface of AlMg2 cladding is one of the changes that occur on the cladding after theU₃Si₂/Al fuel plate has been irradiated in the RSG-GAS reactor to a burn-up of ∼40%. The characterization and observation of the oxide layer was conducted using SEM (Scanning Electron Microscope) and Energy-dispersive X-ray spectroscopy (EDS). Samples with a size of 3x3 mm were taken from the middle of the fuel plate (middle position). After cutting, metallographic preparation includes mounting, grinding, polishing, and ultrasonic cleaning. SEM preparation was carried out by sputter coating using Au layer. The oxide layer on the AlMg2 cladding has a thickness of 10.3 μm with a uniformly distributed cracks along the oxide layer.