Validation of The Gravimetry Method for Determining Rare Earth Elements Oxides
Main Article Content
Abstract
The demand for minerals to meet technological developments is increasing, including minerals that contain rare earth elements (REE). The levels of REE in solids can be determined using conventional analysis methods (gravimetry) and instruments. Even though the instrument method provides more accurate results with a small amount of analyte, the cost is higher compared to the gravimetric method, which requires more analyte and provides good results. Therefore, the gravimetric method is a solution for areas with limited instruments and budgets. The study aims to validate the gravimetric method for determining REE oxides levels, evaluate its precision and accuracy, and assess its feasibility of use. In this study, two methods were used for REE analysis: the ASTM E2941-14 method with sample weight modification and the addition of acid to increase REE oxides recovery and a precipitation method using oxalic acid. The validation stages include sample dissolution, precipitation, filtration, and ash-making. The research results show that the RSD value is 0.3154, which is smaller than 2/3 of Horwitz's CV, namely 4.1727, which means it meets the precision acceptance requirements of ISO/IEC 17025:2017. The REE oxides recovery value, which indicates accuracy, also increased to 97.74%. Therefore, the gravimetric method can be used as an alternative for determining REE oxides levels.
Article Details

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
1. Introduction
By using or sharing content from EKSPLORIUM - Buletin Pusat Pengembangan Bahan Galian Nuklir ("the Journal"), you agree to follow these Terms and Conditions. The Journal's content is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) license. If you do not agree to these terms, please do not use the content.
2. How You Can Use the Content
-
Share: You can copy, share, and distribute the work, but only for non-commercial purposes.
-
Adapt: You can change, remix, or build on the work, as long as it is for non-commercial purposes and you share it under the same license (CC BY-NC-SA).
3. Attribution (Giving Credit)
When you use or share the content, you must:
-
Give proper credit to the author(s).
-
Mention the title of the work and the journal name.
-
Provide a link to the license (https://creativecommons.org/licenses/by-nc-sa/4.0/).
-
Indicate if you made any changes to the work.
4. Non-Commercial Use
You cannot use the work to make money or for any commercial activities. For example, you cannot sell or use the content in advertisements.
If you want to use the content for commercial purposes, you need to get permission from the author(s) or the publisher.
5. ShareAlike
If you make changes to the content (like creating a new version or remixing it), you must share your new version under the same CC BY-NC-SA license.
6. Exclusions
Some materials in the Journal may have different licenses or restrictions, such as third-party content (like images or datasets). You must respect the rules for those materials.
7. No Warranty
The content is provided "as is." The authors and publisher do not guarantee that the content is error-free or suitable for any specific purpose. Use the content at your own risk.
8. Modifications and Withdrawal of Content
The publisher and authors can update or remove content at any time. If content is removed, the previous versions will still follow these terms.
9. Ethical Use
You must use the content ethically and follow all relevant laws. This includes properly citing the original authors and not misusing the content.
10. Legal Compliance
You are responsible for making sure your use of the content follows the laws of your country. If you believe content violates your rights, please contact us.
11. Changes to Terms
These Terms and Conditions may be updated from time to time. Any changes will be posted on the Journal's website.
12. Contact Information
For questions about these Terms or for permission to use content commercially, please contact us at:
-
Email: eksplorium@brin.go.id
-
Website: https://ejournal.brin.go.id/eksplorium
Conclusion
By using the content from EKSPLORIUM - Buletin Pusat Pengembangan Bahan Galian Nuklir, you agree to follow these Terms and Conditions and the CC BY-NC-SA 4.0 International License.
References
[1] S. M. Jowitt, “Mineral economics of the rare-earth elements,” MRS Bull, vol. 47, no. 3, pp. 276–282, 2022, doi: 10.1557/s43577-022-00289-3.
[2] N. Aziz et al., “Separation of Dysprosium (Dy) from Rare Earth Hidroxide Using Precipitation Methods,” Materials Science Forum, vol. 1093, pp. 133–137, 2023, [Online]. Available: https://api.semanticscholar.org/CorpusID:260072318
[3] G. Torta, L. Ciacci, I. Vassura, and F. Passarini, “Exploring mass and economic potentials of rare earth elements recycling from electric vehicles at end-of-life,” Mineral Economics, 2024, doi: 10.1007/s13563-024-00433-2.
[4] R. Prassanti, J. N. Kurniawan, K. Trinopiawan, Y. S. B. Susilo, and K. S. Widana, “Rare Earth Precipitation from Chloride Solution with Oxalic Acid in Monazite Processing,” in AIP Conference Proceedings, 2024. doi: 10.1063/5.0192886.
[5] Y. Wang, P. Ziemkiewicz, and A. Noble, “A Hybrid Experimental and Theoretical Approach to Optimize Recovery of Rare Earth Elements from Acid Mine Drainage Precipitates by Oxalic Acid Precipitation,” Minerals, vol. 12, no. 2, 2022, doi: 10.3390/min12020236.
[6] A. Nawab, X. Yang, and R. Honaker, “Parametric study and speciation analysis of rare earth precipitation using oxalic acid in a chloride solution system,” Miner Eng, vol. 176, 2022, doi: 10.1016/j.mineng.2021.107352.
[7] “General requirements for the competence of testing and calibration laboratories,” International Standardization Organization. Accessed: Oct. 13, 2023. [Online]. Available: https://www.iso.org/publication/PUB100424.html
[8] S. S. C. Sajima, “Sintesis dan Sertifikasi Bahan Acuan Bersertifikat (CRM) Zirkonia Hasil Olah Pasir Zirkon,” GANENDRA Majalah IPTEK Nuklir, vol. 19, no. 1, 2016, doi: 10.17146/gnd.2016.19.1.2778.
[9] Abhilash and A. Akcil, “Critical and Rare Earth Elements - Recovery from Secondary Resources,” Taylor & Francis Group, no. December. 2020.
[10] K. N. Han, “Characteristics of precipitation of rare earth elements with various precipitants,” Minerals, vol. 10, no. 2, Feb. 2020, doi: 10.3390/min10020178.
[11] EURAMET et al., Guidelines on the Determination of Uncertainty in Gravimetric Volume Calibration. 2018.
[12] A. I. M. Committee, Standard method performance requirements-AOAC International methods committee guidelines for validation of biological threat agent methods and/or procedures, vol. 94. 2011.
[13] D. N. Faridah, D. Erawan, K. Sutriah, A. Hadi, and F. Budiantari, Implementasi SNI ISO/IEC 17025:2017 Persyaratan Umum Kompetensi Laboratorium Pengujian dan Laboratorium Kalibrasi, Pertama (2018). Jakarta Pusat: Badan Standarisasi Nasional, 2018.
[14] V. Barwick et al., The fitness for purpose of analytical methods. Eurachem, 2014.
[15] “Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion 1,” American Society for Testing and Material Standards. [Online]. Available: www.astm.org,
[16] M. Peiravi et al., “A Review of Rare-Earth Elements Extraction with Emphasis on Non-conventional Sources: Coal and Coal By-products, Iron Ore Tailings, Apatite, and Phosphate By-products,” Mining, Metallurgy and Exploration, vol. 38, no. 1. 2021. doi: 10.1007/s42461-020-00307-5.
[17] R. Chi and Z. Xu, “A solution chemistry approach to the study of rare earth element precipitation by oxalic acid,” Metallurgical and Materials Transactions B, vol. 30, no. 2, pp. 189–195, Apr. 1999, doi: 10.1007/s11663-999-0047-0.
[18] S. Peelman, D. Kooijman, J. Sietsma, and Y. Yang, “Hydrometallurgical Recovery of Rare Earth Elements from Mine Tailings and WEEE,” Journal of Sustainable Metallurgy, vol. 4, no. 3, pp. 367–377, Sep. 2018, doi: 10.1007/s40831-018-0178-0.
[19] ORE Research & Exploration, “OREAS 464 Certificate,” ORE Research & Exploration. Accessed: Oct. 12, 2023. [Online]. Available: https://www.oreas.com/crm/oreas-464/