BATHYMETRIC EXTRACTION USING PLANETSCOPE IMAGERY (CASE STUDY: KEMUJAN ISLAND, CENTRAL JAVA)

Authors

  • Asih Sekar Sesama Faculty of Fisheries and Marine Sciences, Brawijaya University
  • Kuncoro Teguh Setiawan Remote Sensing Applications Center–National Institute of Aeronautics and Space (LAPAN)
  • Atriyon Julzarika Department of Geodesy and Geomatics Engineering, Universitas Gadjah Mada (UGM)

DOI:

https://doi.org/10.30536/j.ijreses.2020.v17.a3445

Keywords:

marine resources activity, Stumpf algorithm, Karimun Jawa Island, remote sensing, water characteristics

Abstract

Bathymetry refers to the depth of the seabed relative to the lowest water level. Depth information is essential for various studies of marine resource activities, for managing port facilities and facilities, supporting dredging operations, and predicting the flow of sediment from rivers into the sea. Bathymetric mapping using remote sensing offers a more flexible, efficient,and cost-effective method and covers a largearea. This study aims to determine the ability of Planet Scope imagery to estimate and map bathymetry and to as certain its accuracy using the Stumpf algorithm on the in-situ depth data. PlanetScope level 3B satellite imagery and tide-corrected survey dataare employed; satellite images are useful in high-precision bathymetry extraction.The bathymetric extraction method used the Stumpf algorithm. The research location was Kemujan Island, Karimunjawa Islands, Central Java. The selection of this region wasbased on its water characteristics, which have a reasonably high variation in depth. Based on the results of the data processing, it was found that the PlanetScope image data were able to estimate depths of up to 20 m. In the bathymetric results, the R2 accuracy value was 0.6952, the average RMSE value was 2.85 m,and the overall accuracy rate was 71.68%.

Downloads

Published

2025-11-25

Issue

Vol. 17 No. 2 (2020)

Section

Articles

License

Copyright (c) 2020 Author (s)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Copyright Notice for the International Journal of Remote Sensing and Earth Sciences (IJReSES)

Copyright Holder: Author(s).

By submitting an article to IJReSES, author(s) agree to the following terms:

1. Grant of Publishing Rights: Authors grant IJReSES the license to publish the article and to identify itself as the original publisher. This includes the right to make the article available in all forms and media.

2. Commercial Rights: Authors grant IJReSES the rights to produce and sell hardcopy volumes of the journal. These volumes may be purchased by libraries, individuals, or other entities.

3. Third-Party Use: Authors agree to allow any third party to freely use the article, provided that the original authors are credited and the article is cited appropriately. This facilitates the dissemination and impact of the work.

4. Creative Commons License: The article is distributed under the Creative Commons Attribution non Commercial Share Alike 4.0 License (CC BY-NC-SA 4.0). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as the original author is credited for the original creation.

5. Associated Published Material: Unless otherwise stated, any associated published material (such as supplementary data, graphics, and multimedia) is distributed under the same CC BY-NC-SA 4.0 License.

By adhering to these terms, authors ensure the wide dissemination and accessibility of their work, contributing to the advancement of knowledge in the fields of remote sensing and earth sciences.