BATHYMETRY DATA EXTRACTION ANALYSIS USING LANDSAT 8 DATA
DOI:
https://doi.org/10.30536/j.ijreses.2016.v13.a2448Keywords:
bathymetry, Landsat 8, reflectance, Van Hengel and Spitzer algorithmAbstract
The remote sensing technique can be used to produce bathymetric map. Bathymetric mapping is important for the coastal zone and watershed management. In the previous study conducted in Menjangan Island of Bali, bathymetric extractin information from the top of the atmosphere (TOA) reflectance image of Landsat ETM+ data has R2 = 0.620. Not optimal  correlation value produced is highly influenced by the reflectance image of Landsat ETM+ data, were used, hence the lack of the research which became the basis of the present study. The study was on the Karang Lebar water of Thousand Islands, Jakarta. And the aim was to determine whether there was an increased correlation coefficient value of bathymetry extraction information generated from Surface reflectance and TOA reflectance imager of Landsat 8 data acquired on August 12, 2014. The method of extraction was done using algorithms Van Hengel and Spitzer (1991). Extraction   absolute depth information obtained from the model logarithm of Landsat 8 surface reflectance images and pictures TOA produce a correlation value of R2 = 0.663 and R2 = 0.712.
Downloads
Published
Issue
Section
License
Copyright (c) 2016 Author (s)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright Notice for the International Journal of Remote Sensing and Earth Sciences (IJReSES)
Copyright Holder: Author(s).
By submitting an article to IJReSES, author(s) agree to the following terms:
1. Grant of Publishing Rights: Authors grant IJReSES the license to publish the article and to identify itself as the original publisher. This includes the right to make the article available in all forms and media.
2. Commercial Rights: Authors grant IJReSES the rights to produce and sell hardcopy volumes of the journal. These volumes may be purchased by libraries, individuals, or other entities.
3. Third-Party Use: Authors agree to allow any third party to freely use the article, provided that the original authors are credited and the article is cited appropriately. This facilitates the dissemination and impact of the work.
4. Creative Commons License: The article is distributed under the Creative Commons Attribution non Commercial Share Alike 4.0 License (CC BY-NC-SA 4.0). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as the original author is credited for the original creation.
5. Associated Published Material: Unless otherwise stated, any associated published material (such as supplementary data, graphics, and multimedia) is distributed under the same CC BY-NC-SA 4.0 License.
By adhering to these terms, authors ensure the wide dissemination and accessibility of their work, contributing to the advancement of knowledge in the fields of remote sensing and earth sciences.
