A PARTIAL ACQUISITION TECHNIQUE OF SAR SYSTEM USING COMPRESSIVE SAMPLING METHOD
DOI:
https://doi.org/10.30536/j.ijreses.2017.v14.a2629Keywords:
partial acquisition technique, synthetic aperture radar, compressive samplingAbstract
In line with the development of Synthetic Aperture Radar (SAR) technology, there is a serious problem when the SAR signal is acquired using high rate analog digital converter (ADC), that require large volumes data storage. The other problem on compressive sensing method,which frequently occurs, is a large measurement matrix that may cause intensive calculation. In this paper, a new approach was proposed, particularly on the partial acquisition technique of SAR system using compressive sampling method in both the azimuth and range direction. The main objectives of the study are to reduce the radar raw data by decreasing the sampling rate of ADC and to reduce the computational load by decreasing the dimension of the measurement matrix. The simulation results found that the reconstruction of SAR image using partial acquisition model has better resolution compared to the conventional method (Range Doppler Algorithm/RDA). On a target of a ship, that represents a low-level sparsity, a good reconstruction image could be achieved from a fewer number measurement. The study concludes that the method may speed up the computation time by a factor 4.49 times faster than with a full acquisition matrix.
Downloads
Published
Issue
Section
License
Copyright (c) 2017 Author (S)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright Notice for the International Journal of Remote Sensing and Earth Sciences (IJReSES)
Copyright Holder: Author(s).
By submitting an article to IJReSES, author(s) agree to the following terms:
1. Grant of Publishing Rights: Authors grant IJReSES the license to publish the article and to identify itself as the original publisher. This includes the right to make the article available in all forms and media.
2. Commercial Rights: Authors grant IJReSES the rights to produce and sell hardcopy volumes of the journal. These volumes may be purchased by libraries, individuals, or other entities.
3. Third-Party Use: Authors agree to allow any third party to freely use the article, provided that the original authors are credited and the article is cited appropriately. This facilitates the dissemination and impact of the work.
4. Creative Commons License: The article is distributed under the Creative Commons Attribution non Commercial Share Alike 4.0 License (CC BY-NC-SA 4.0). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as the original author is credited for the original creation.
5. Associated Published Material: Unless otherwise stated, any associated published material (such as supplementary data, graphics, and multimedia) is distributed under the same CC BY-NC-SA 4.0 License.
By adhering to these terms, authors ensure the wide dissemination and accessibility of their work, contributing to the advancement of knowledge in the fields of remote sensing and earth sciences.
