UTILIZATION OF IKONOS IMAGE AND SRTM AS ALTERNATIVE CONTROL POINT REFERENCE FOR ALOS DEM GENERATION
DOI:
https://doi.org/10.30536/j.ijreses.2010.v7.a1539Keywords:
ALOS PRISM, CP, DEM generation, GCP, IKONOS, SRTMAbstract
Abstract. Digital Elevation Model (DEM) was generated from Advanced LandObservation Satellite - The Panchromatic Remote-Sensing Instrument for Stereo Mapping(ALOS PRISM) stereo data using image matching and collinear correlation based on LeicaPhotogrametry Suite (LPS) software. The process needs three dimension of Ground ControlPoint (GCP) or Control Point (CP) XYZ as input data for collinear correlation to determineexterior orientation coefficient. The main problem of the DEM generation is the difficultyto obtain the accurate field measurement GCP in many areas. Therefore, another alternativeCP sources are needed. The aim of this research was to study the possibility of (IKONOS)image and Shuttle Radar Topography Mission (SRTM) X-C band to be used as CPreference for ALOS PRISM DEM generation. The study area was Sragen and Bandungregion. The DEM of each study area was generated using 2 methods: generated using fieldmeasurement GCPs taken by differential GPS and generated using CPs from IKONOSimage (XY coordinat) and SRTM for (Z elevation). The generated DEMs were compared.The accuracy of both DEMs were evaluated using another field measurement GCPs. Theresult showed that the generated DEM using CPs from IKONOS and SRTM X-C hadrelatively same height pattern and height distribution along transect line with the DEMusing GCPs. The absolute accuracy of the DEM using CPs was about 60% - 80% lessaccuracy comparing to the DEM using GCPs. This research showed that IKONOS imageand SRTM X-C band can be considered as good alternative CP source to generate highaccuracy DEM from ALOS PRISM stereo data.
Downloads
Published
Issue
Section
License
Copyright (c) 2010 Author (S)

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright Notice for the International Journal of Remote Sensing and Earth Sciences (IJReSES)
Copyright Holder: Author(s).
By submitting an article to IJReSES, author(s) agree to the following terms:
1. Grant of Publishing Rights: Authors grant IJReSES the license to publish the article and to identify itself as the original publisher. This includes the right to make the article available in all forms and media.
2. Commercial Rights: Authors grant IJReSES the rights to produce and sell hardcopy volumes of the journal. These volumes may be purchased by libraries, individuals, or other entities.
3. Third-Party Use: Authors agree to allow any third party to freely use the article, provided that the original authors are credited and the article is cited appropriately. This facilitates the dissemination and impact of the work.
4. Creative Commons License: The article is distributed under the Creative Commons Attribution non Commercial Share Alike 4.0 License (CC BY-NC-SA 4.0). This license allows others to distribute, remix, adapt, and build upon the work, even commercially, as long as the original author is credited for the original creation.
5. Associated Published Material: Unless otherwise stated, any associated published material (such as supplementary data, graphics, and multimedia) is distributed under the same CC BY-NC-SA 4.0 License.
By adhering to these terms, authors ensure the wide dissemination and accessibility of their work, contributing to the advancement of knowledge in the fields of remote sensing and earth sciences.


