Impact of Surfactants on the Performance of Plastic Modified Bitumen: A Study on Ductility, Penetration, and Softening Point
DOI:
https://doi.org/10.55981/jsmi.2025.11263Keywords:
Surfactants Plastic, Modified Bitumen, Multilayer PlasticsAbstract
This study explores the effect of surfactant use, namely Sorbitan Monostearate (Span 60) and Polyethylene Glycol 400 (PEG 400), on the physical and mechanical characteristics of bitumen modified with multilayer plastic. The focus of this study is to improve the compatibility between bitumen and multilayer plastic, which often have incompatible properties, thus affecting the performance of bitumen. Methodology applied includes the preparation of bitumen samples modified with varying surfactant concentrations, followed by microscopic analysis to assess particle dispersion and distribution. The results showed that the addition of surfactants significantly improved particle dispersion, with smaller particle sizes and more even distribution. Ductility tests showed that bitumen modified with surfactants had better flexibility compared to conventional bitumen, while penetration tests showed improved elasticity properties. These findings indicate that the use of surfactants in bitumen modification can improve the physical and mechanical properties of the material, providing potential for wider applications in the construction industry. Further research is recommended to explore other surfactant combinations and their impact on bitumen properties under various environmental conditions.
Downloads
References
[1] Shiyu Tao, Tianhao Li, Mingyu Li, Shengxin Yang, Maocai Shen, and Hui Liu, “Research advances on the toxicity of biodegradable plastics derived micro/nanoplastics in the environment: A review,” Sci. Total Environ., vol. 916, no. January, p. 170299, 2024, doi: 10.1016/j.scitotenv.2024.170299.
[2] Rodrigo A. Muñoz Meneses, Gerardo Cabrera-Papamija, Fiderman Machuca-Martínez, Luis A. Rodríguez, Jesús E. Diosa, and Edgar Mosquera-Vargas, “Plastic recycling and their use as raw material for the synthesis of carbonaceous materials,” Heliyon, vol. 8, no. 3, 2022, doi: 10.1016/j.heliyon.2022.e09028.
[3] Md Tanvir Hossain, Md Abdus Shahid, Nadim Mahmud, Ahasan Habib, Md Masud Rana, Shadman Ahmed Khan, and Md Delwar Hossain, “Research and application of polypropylene: a review,” Discov. Nano, vol. 19, no. 1, 2024, doi: 10.1186/s11671-023-03952-z.
[4] Sushant Agarwal and Rakesh K. Gupta, Plastics in Buildings and Construction, Second Edi. Elsevier Inc., 2017. doi: 10.1016/B978-0-323-39040-8.00030-4.
[5] Anthony L. Andrady and Mike A. Neal, “Applications and societal benefits of plastics,” Philos. Trans. R. Soc. B Biol. Sci., vol. 364, no. 1526, pp. 1977–1984, 2009, doi: 10.1098/rstb.2008.0304.
[6] Andrea Cherubini, Valerio Ortenzi, Akansel Cosgun, Robert Lee, and Peter Corke, “Model-free vision-based shaping of deformable plastic materials,” Int. J. Rob. Res., vol. 39, no. 14, pp. 1739–1759, 2020, doi: 10.1177/0278364920907684.
[7] Onwughara Nkwachukwu, Chukwu Chima, Alaekwe Ikenna, and Lackson Albert, “Focus on potential environmental issues on plastic world towards a sustainable plastic recycling in developing countries,” Int. J. Ind. Chem., vol. 4, no. 1, p. 34, 2013, doi: 10.1186/2228-5547-4-34.
[8] Cayla R. Cook and Rolf U. Halden, Ecological and health issues of plastic waste. Elsevier Inc., 2020. doi: 10.1016/B978-0-12-817880-5.00020-7.
[9] Kim Borg, Alyse Lennox, Stefan Kaufman, Fraser Tull, Renee Prime, Luke Rogers, and Emily Dunstan, “Curbing plastic consumption: A review of single-use plastic behaviour change interventions,” J. Clean. Prod., vol. 344, no. February, p. 131077, 2022, doi: 10.1016/j.jclepro.2022.131077.
[10] Geraldine Cabrera, Jixiang Li, Abderrahim Maazouz, and Khalid Lamnawar, “A Journey from Processing to Recycling of Multilayer Waste Films: A Review of Main Challenges and Prospects,” Polymers (Basel)., vol. 14, no. 12, 2022, doi: 10.3390/polym14122319.
[11] Katharina Kaiser, Markus Schmid, and Martin Schlummer, “Recycling of polymer-based multilayer packaging: A review,” Recycling, vol. 3, no. 1, 2018, doi: 10.3390/recycling3010001.
[12] Chris Matthews, Fintan Moran, and Amit K. Jaiswal, “A review on European Union’s strategy for plastics in a circular economy and its impact on food safety,” J. Clean. Prod., vol. 283, p. 125263, 2021, doi: 10.1016/j.jclepro.2020.125263.
[13] Giovanni Polacco, Sara Filippi, Filippo Merusi, and George Stastna, “A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility,” Adv. Colloid Interface Sci., vol. 224, pp. 72–112, 2015, doi: 10.1016/j.cis.2015.07.010.
[14] S. Binet, A. Pfohl-Leszkowicz, H. Brandt, M. Lafontaine, and Marcel Castegnaro, “Bitumen fumes: Review of work on the potential risk to workers and the present knowledge on its origin,” Sci. Total Environ., vol. 300, no. 1–3, pp. 37–49, 2002, doi: 10.1016/S0048-9697(02)00279-6.
[15] Ehsan Behzadfar and Savvas G. Hatzikiriakos, “Viscoelastic properties and constitutive modelling of bitumen,” Fuel, vol. 108, pp. 391–399, 2013, doi: 10.1016/j.fuel.2012.12.035.
[16] Ian Sims, The Shell Bitumen Handbook, vol. 169, no. 1. 2016. doi: 10.1680/jcoma.15.00061.
[17] Jiqing Zhu, Björn Birgisson, and Niki Kringos, “Polymer modification of bitumen: Advances and challenges,” Eur. Polym. J., vol. 54, no. 1, pp. 18–38, 2014, doi: 10.1016/j.eurpolymj.2014.02.005.
[18] Calvin S. A. L. Gaol, Bambang Priyono, M. Chalid, and Adam Febriyanto Nugraha, “The Effect Of Multilayer Plastic Waste Addition To Polymer Modified Bitumen Characteristics,” OISAA J. Indones. Emas, vol. 6, no. 1, pp. 57–64, 2023, doi: 10.52162/jie.2023.006.01.7.
[19] Tadmor Z and Gogos C, Principles Of Polymer Processing. John Wiley & Sons, Inc, 2006.
[20] M. Dines. Manikanta and M.Dinesh Kumar, “Comparative study on ductility of bitumen and plastic fiber modified bitumen,” Int. Conf. Newer Eng. Concepts Technol., 2025.
[21] Jiqing Zhu, Xiaohu Lu, Michael Langfjell, and Anders Gudmarsson, “Quantitative relationship of fundamental rheological properties of bitumen with the empirical Ring and Ball softening point,” Road Mater. Pavement Des., vol. 22, no. S1, pp. S345–S364, 2021, doi: 10.1080/14680629.2021.1900898.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Nugraha Wahyu Pratama, Mochamad Chalid, Farhan Aziz
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
