Hydrolysate as an alternative feedstock for furfural production
Keywords:
Furfural, Diluted acid, Hydrochloric acid, HydrolysateAbstract
Furfural has emerged as a value-added chemical product which generated from hemicellulose-base biomass, in the context of hardwood it called as biorefining. Several methods have been developed to produce furfural using both hydrothermal and catalytic processes. In this study, hydrolysate is used as feedstock for generating furfural by using diluted sulfuric acid and aluminium chloride. Temperature and reaction time has been considered as the valuable variable. Hydrolysate was charged with the acid-catalyst for around 90 min at certain temperature. The product analyzed by using fourier transform index refractory and excess bromine method. At this time, the highest yield of furfural for non-catalyst process was achieved at 120 oC for 90 min. Diluted acid solution by hydrochloric acid and AlCl3 1% managed to increase furfural production from hydrolysate in the mild temperature.Downloads
References
K. Dalvand, J. Rubin, S. Gunukula, M. Clayton Wheeler, and G. Hunt. “Economics of biofuels: Market potential of furfural and its derivatives.” Biomass and Bioenergy, vol. 115, pp. 56–63, 2018.
M. Kabbour and R. Luque. “Chapter 10-Furfural as a platform chemical: From production to applications,” in Biomass, Biofuels, Biochemicals, S. Saravanamurugan, A. Pandey, H. Li, and A. Riisager, Eds. Elsevier, 2020, 283–297.
P. P. Upare, R. E. Clarence, H. Shin, and B. G. Park. “An overview on production of lignocellulose-derived platform chemicals such as 5-hydroxymethyl furfural, furfural, protocatechuic acid pravin.” Processes, vol. 11, no. 10, p. 2912, 2023.
F. Delbecq, Y. Wang, and C. Len. “Conversion of xylose, xylan and rice husk into furfural via betaine and formic acid mixture as novel homogeneous catalyst in biphasic system by microwave-assisted dehydration.” J. Mol. Catal. A Chem., vol. 423, pp. 520–525, 2016.
Y. Zhao, K. Lu, H. Xu, L. Zhu, and S. Wang. “A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion.” Renew. Sustain. Energy Rev., vol. 139, p. 110706, 2021.
B. Hu, W. L. Xie, Y. T. Wu, J. Liu, S. W. Ma, T. P. Wang, S. Zheng, and Q. Lu. “Mechanism study on the formation of furfural during zinc chloride-catalyzed pyrolysis of xylose.” Fuel, vol. 295, p. 120656, 2021.
M. S. Jahan, M. M. Rahman, and Y. Ni. “Alternative initiatives for non-wood chemical pulping and integration with the biorefinery concept: A review.” Biofuels, Bioprod. Biorefining, vol. 15, no. 1, pp. 100–118, 2021.
M. S. Naga Sai, D. De, and B. Satyavathi. “Sustainable production and purification of furfural from waste agricultural residue: An insight into integrated biorefinery.” J. Clean. Prod., vol. 327, p. 129467, 2021.
C. B. T. L. Lee and T. Y. Wu. “A review on solvent systems for furfural production from lignocellulosic biomass.” Renew. Sustain. Energy Rev., vol. 137, p. 110172, 2021.
S. P. Utami, K. Tanifuji, A. S. Putra, A. Nakagawa-Izumi, H. Ohi, and E. Evelyn. “Effects of soluble anthraquinone application on prehydrolysis soda cooking of acacia crassicarpa wood.” Japan Tappi J., vol. 75, no. 4, pp. 373–379, 2021.
M. Chem, K. Tanifuji, S. P. Utami, A. S. Putra, H. Ohi, and A. Nakagawa-Izumi. “Development of dissolving pulp from Phyllostachys pubescens stem by prehydrolysis soda cooking with 2-methylanthraquinone.” Ind. Crop. Prod., vol. 178, p. 114570, 2022.
G. Gómez Millán, S. Hellsten, A. W. T. King, J. P. Pokki, J. Llorca, and H. Sixta. “A comparative study of water-immiscible organic solvents in the production of furfural from xylose and birch hydrolysate.” J. Ind. Eng. Chem., vol. 72, pp. 354–363, 2019.
T. Hata and H. Nonaka. “Fractionation of woody biomass with impregnation of monophenol by prehydrolysis and the subsequent soda cooking.” Bioresour. Technol. Reports, vol. 5, pp. 178–184, 2019.
G. Mongkhonsiri, A. Anantpinijwatna, P. Charoensuppanimit, A. Arpornwichanop, R. Gani, and S. Assabumrungrat. “Novel biorefinery-Integrated-Kraft-pulping network for sustainable development.” Chem. Eng. Process. - Process Intensif., vol. 163, p. 108373, 2021.
A. Salaghi, A. S. Putra, A. T. Rizaluddin, M. Kajiyama, and H. Ohi. “Totally chlorine‑free bleaching of prehydrolysis soda pulp from plantation hardwoods consisting of various lignin structures.” J. Wood Sci., vol. 65, no. 10, 2019.
A. Mazar, O. Ajao, M. Benali, N. Jemaa, W. Wafa Al-Dajani, and M. Paleologou. “Integrated multiproduct biorefinery for furfural production with acetic acid and lignin recovery: Design, scale-up evaluation, and technoeconomic analysis.” ACS Sustain. Chem. Eng., vol. 8, no. 47, pp. 17345–17358, 2020.
N. E. Ali Othman, A. A. B. D. Aziz, W. H. Wan Hassan, N. F. Jailani, F. A. Hamid, and N. Abdul Wahab. “Production of furfural from oil palm fibres.” J. Oil Palm Res., vol. 33, no. 3, pp. 473–481, 2021.
B. M. Matsagar, S. A. Hossain, T. Islam, H. R. Alamri, Z. A. Alothman, Y. Yamauchi, P. L. Dhepe, and K. C. -W. Wu. “Direct production of furfural in one-pot fashion from raw biomass using brønsted acidic ionic liquids.” Sci. Rep., vol. 7, p. 13508, 2017.
N. Yavorov, I. Valchev, G. Radeva, and D. Todorova. “Kinetic investigation of dilute acid hydrolysis of hardwood pulp for microcrystalline cellulose production.” Carbohydr. Res., vol. 488, p. 107910, 2020.
A. S. Putra, A. Nakagawa-izumi, M. Kajiyama, and H. Ohi. “Peer reviewed biorefinery of oil palm empty fruit bunch by nitric acid prehydrolysis soda cooking. Production of furfural and dissolving pulp.” Japan Tappi J., vol. 72, no. 6, pp. 641–649, 2018.
J. Yang, X. Niu, H. Wu, H. Zhang, Z. Ao, and S. Zhang. “Valorization of humin as a glucose derivative to fabricate a porous carbon catalyst for esterification and hydroxyalkylation/alkylation.” Waste Manag., vol. 103, pp. 407–415, 2020.
L. Filiciotto, A. M. Balu, J. C. Van der Waal, and R. Luque. “Catalytic insights into the production of biomass-derived side products methyl levulinate, furfural and humins.” Catal. Today, vol. 302, pp. 2–15, 2018.
T. Rosenau, A. Potthast, N. S. Zwirchmayr, H. Hettegger, F. Plasser, T. Hosoya, M. Bacher, K. Krainz, and T. Dietz. “Chromophores from hexeneuronic acids: identification of HexA-derived chromophores.” Cellulose, vol. 24, pp. 3671–3687, 2017.
K. Sun, Y. Shao, P. Liu, L. Zhang, G. Gao, D. Dong, S. Zhang, G. Hu, L. Xu, and X. Hu. “A solid iron salt catalyst for selective conversion of biomass-derived C5 sugars to furfural.” Fuel, vol. 300, p. 120990, 2021.
L. Zhang, H. Yu, P. Wang, H. Dong, and X. Peng. “Conversion of xylan, d-xylose and lignocellulosic biomass into furfural using AlCl3 as catalyst in ionic liquid.” Bioresour. Technol., vol. 130, pp. 110–116, 2013.
X. Lyu and G. G. Botte. “Investigation of factors that inhibit furfural production using metal chloride catalysts.” Chem. Eng. J., vol. 403, p. 126271, 2021.
F. Fringuelli, F. Pizzo, and L. Vaccaro. “AlCl3 as an efficient Lewis acid catalyst in water.” Tetrahedron Lett., vol. 42, no. 6, pp. 1131–1133, 2001.
G. M. Kline and S. F. Acree. “Volumetric determination of pentoses and pentosans,” Bur. Stand. J. Res., vol. 8, 1932.
A. B. D. Nandiyanto, R. Oktiani, and R. Ragadhita. “How to read and interpret ftir spectroscope of organic material.” Indones. J. Sci. Technol., vol. 4, no. 1, pp. 97–118, 2019.
T. Tongtummachat, A. Jaree, and N. Akkarawatkhoosith. “Continuous hydrothermal furfural production from xylose in a microreactor with dual-acid catalysts.” RSC Adv., vol. 12, no. 36, pp. 23366–23378, 2022.
M. Lopes, K. Dussan, and J. J. Leahy. “Enhancing the conversion of D-xylose into furfural at low temperatures using chloride salts as co-catalysts: Catalytic combination of AlCl3 and formic acid.” Chem. Eng. J., vol. 323, pp. 278–286, 2017.
I. Van Zandvoort, Y. Wang, C. B. Rasrendra, E. R. H. van Eck, P. C. A. Bruijnincx, H. J. Heeres, and B. M. Weckhuysen. “Formation, molecular structure, and morphology of humins in biomass conversion: Influence of feedstock and processing conditions.” ChemSusChem, vol. 6, no. 9, pp. 1745–1758, 2013.
A. Wassenberg, T. Esser, M. J. Poller, and J. Albert. “Investigation of the formation, characterization, and oxidative catalytic valorization of humins.” Materials., vol. 16, no. 7, p. 2864, 2023.
D. Zhang, N. Zhang, X. Yu, Z. Zhang, S. Yang, and C. Zhang. “Effect of humins from different sediments on microbial degradation of 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB153), and their polyphasic characterization.” RSC Adv., vol. 7, pp. 6849–6855, 2017.
Z. Jiang, D. Hu, Z. Zhao, Z. Yi, Z. Chen, and K. Yan. “Mini-review on the synthesis of furfural and levulinic acid from lignocellulosic biomass.” Processes, vol. 9, no. 7, 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Syelvia Putri Utami, Yoanni Marsha Rezki, Vina Ermalinda, Komalasari, Yelmida Aziz
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
