SIMULATION OF IRON CORROSION IN LEAD-MAGNESIUM EUTECTIC (LME) USING OXYGEN INHIBITOR

Authors

  • Umi Sa’adah Physics Department, Faculty of Mathematics and Natural Sciences - University of Jember Jalan Kalimantan No. 37, Sumbersari, Jember, 68121
  • Artoto Arkundato Physics Department, Faculty of Mathematics and Natural Sciences - University of Jember Jalan Kalimantan No. 37, Sumbersari, Jember, 68121
  • Moh. Hasan Mathematics Department, Faculty of Mathematics and Natural Sciences - University of Jember Jalan Kalimantan No. 37, Sumbersari, Jember, 68121

Keywords:

corrosion in liquid metals, molecular dynamics, lead-magnesium alloys, oxygen concentration

Abstract

Lead-magnesium (Pb-Mg) is a metal that considered to have potential as a coolant raw material in the heat transfer system of nuclear reactors. However, the coolant in the form of Pb-Mg eutectic is corrosive to structured materials (eg steel cladding) used in reactors. In this research, steel material is represented by pure iron to simplify the simulation and calculation. This research aims to determine the effect of temperature on iron corrosion and the effect of adding oxygen as an inhibitor to reduce the iron corrosion rate in LME. In this study, corrosion was observed by looking at (coefficient) the diffusion of iron atoms into LME. A large iron diffusion coefficient represents high iron corrosion. To see inhibition effectivity with oxygen, the most effective oxygen concentration that can reduce the iron diffusion coefficient is searched. Simulations of iron corrosion and inhibition are performed using molecular dynamics simulation. The result of this research showed that oxygen concentration mixed into LME for effective inhibition of iron corrosion was in the range of 0.125 wt% - 0.135 wt% (for temperatures of 973K). Thus, oxygen is believed that able to inhibit iron corrosion in Pb-Mg eutectic up to 98.44%

Downloads

Download data is not yet available.

References

J. Zhang, P. Hosemann, and S. Maloy, “Models of liquid metal corrosion,” J. Nucl. Mater., vol. 404, no. 1, pp. 82–96, 2010.

OECD/NEA, Handbook on Lead-bismuth Eutectic Alloy and Lead Properties , Materials Compatibility , Thermal-hydraulics and Technologies ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT, no. 6195. 2007.

D.- Bodansky, Nuclear Energi, ‘Principles, Practices, and Prospects, 2nd edition,’ vol. 39, no. 5. 2004.

J. Zhang and N. Li, “Review of the studies on fundamental issues in LBE corrosion,” vol. 373, pp. 351–377, 2008.

P. Parsons and G. Dissons, “The Periodic Table: A field guide to the elements.” 2014.

A. Z. Kashezhev, V. A. Sozaev, A. I. Khasanov, and A. G. Mozgovoi, “An Experimental Investigation of the Wetting of Reactor Steels,” vol. 48, no. 5, pp. 793–795, 2010.

S. Lyon, “Corrosion of Lead and its Alloys,” no. December 2010, 2018.

W. D. Manly, “Fundamentals of Liquid Metal Corrosion.” 1956.

A. Khalid and M. Takahashi, “‘Corrosion characteristics of materials in Pb – Bi under transient temperature conditions,’” J. Nucl. Mater., vol. 398, no. 1–3, pp. 139–145, 2010.

A. Arkundato, Z. Su’Ud, M. Abdullah, W. Sutrisno, and M. Celino, “Inhibition of iron corrosion in high temperature stagnant liquid lead: A molecular dynamics study,” Ann. Nucl. Energy,

vol. 62, pp. 298–306, 2013.

P. Alekseev and A. L. Shimkevich, “Eutectic Na – Tl and Pb – Mg alloys as liquid-metal coolants for fast nuclear reactors,” no. April 2019, 2015.

E. A. Orlova et al., “Self-organizing carbon nitride coatings on steel from molten lead – magnesium eutectic,” Nucl. Energy Technol., vol. 1, no. 3, pp. 226–231, 2016.

R. A. Khairulin, A. S. Kosheleva, and S. V Stankus, “‘Thermal Properties of Liquid Alloys of Magnesium-Lead System,’” vol. 14, no. 1, pp. 75– 80, 2007.

K. Refson, “Moldy User ’ s Manual,” 2001.

J. M. Haile, I. Johnston, A. J. Mallinckrodt, and S. Mckay, “Molecular Dynamics Simulation: Elementary Methods,” vol. 625, no. 1993, pp. 6–7, 1996.

A. Arkundato, Z. Su’ud, Sudarko, M. Hasan, “Molecular dynamics simulation of corrosion mitigation of iron in lead-bismuth eutectic using nitrogen as corrosion inhibitor Molecular dynamics simulation of corrosion mitigation of iron in lead-bismuth eutectic using nitrogen as corrosion inhibitor,” Phys. Conf. Ser. 622 012009, 2015.

J. Davies, “‘Calculation of the Lennard- Jones nrn Potential Energy Paramcters for Metals,’” vol. 595, 1983.

A. Y. Kupryazhkin, A. N. Zhiganov, and D. V Risovany, “Simulation of diffusion of oxygen and uranium in uranium dioxide nanocrystals,” vol. 372, no. 1, pp. 233–238, 2008.

A. Stukowski, “Visualization and analysis of atomistic simulation data with OVITO – the Open Visualization Tool,” vol. 015012, 2010.

Downloads

Published

21-10-2026

How to Cite

Umi Sa’adah, Artoto Arkundato, & Moh. Hasan. (2026). SIMULATION OF IRON CORROSION IN LEAD-MAGNESIUM EUTECTIC (LME) USING OXYGEN INHIBITOR. Jurnal Sains Materi Indonesia, 21(3), 129–134. Retrieved from https://ejournal.brin.go.id/jsmi/article/view/5829