SYNTHESIS AND CHARACTERIZATION OF Li4Ti5O12 WITH SOL GEL METHOD AS A LITHIUM ION-BATTERY ANODE MATERIAL
DOI:
https://doi.org/10.17146/jsmi.2019.20.2.5448Keywords:
Li4Ti5O12 anode, Sol gel method, Lithium Ion BatteryAbstract
SYNTHESIS AND CHARACTERIZATION OF Li4Ti5O12 WITH SOL GEL METHOD AS A LITHIUM ION-BATTERY ANODE MATERIAL. Synthesis of anode Li4Ti5O12 material has been carried out using the sol gel method. The synthesis is carried out with variations in sintering temperatures at 500 oC, 600 oC, 700 oC dan 800 oC. Characterization carried out includes testing thermal analysis to determine the optimum temperature for sintering, XRD (X-ray Diffraction) to find out the phase formation of Li4Ti5O12, Scanning electron microscope (SEM) to analyse the morphology formed, testing Cyclic voltammetry, charge-discharge and Electrochemical Impedance Spectroscopy (EIS) is carried out to find out the elec- trochemical performance. From the results of characterization of thermal and XRD analyses, the optimum temperature for synthesis is 800oC with small impurity content. The results of SEM characterization show that the morphology of the sample is not homogeneous, and the particles are agglomerated. The resulting electrochemical performance increases along with the increase in temperature for sintering, including voltammogram graphs, diffusion coefficient values, electrical conductivity and charge-discharge capacity. Of all the samples, the LTO sintered at 800oC shows good electrochemical performance with a sharp and good voltammogram graph, diffusion coefficient value of lithium ion is 1.58 × 10-9 cm2s-1, electrical conductivity of 0.6282 S/cm and the discharge capacity given is 78,07 mAh/g.
Downloads
References
. P. G. Bruce, B. Scrosati, and J. Tarascon, “Lithium Batteries Nanomaterials for Rechargeable Lithium Batteries ** Angewandte,” pp. 2930–2946, 2008.
. Y. Wang et al., “Lithium and lithium ion batteries for applications in microelectronic devices : A review,” J. Power Sources, vol. 286, pp. 330– 345, 2015.
. Masaki Yoshio, Ralph J. Brodd, Akiya Kozawa, Lithium-Ion Batteries. New York: Springer, 2009. [4]. B. Zhao, R. Ran, M. Liu, and Z. Shao, “A comprehensive review of Li4Ti5O12 -based electrodes for lithium-ion batteries: The latest advancements and future perspectives,” Mater. Sci. Eng. R Reports, vol. 98, pp. 1–71, 2015.
. X. Yang et al., “Size-Tunable Single-Crystalline Anatase TiO2 Cubes as Anode Materials for Lithium Ion Batteries,” J. Phys. Chem. C, vol. 119, no. 8, pp. 3923–3930, 2015.
. S. Zhang, X. Ge and C. Chen. "Synthesis of carbon-coated Li4Ti5O12 and its electrochemical performance as anode material for lithium-ion battery.".Chinese Chemical Letters, vol.33, pp. 2274-2276, 2017
. Y. Kuo and J. Lin, “Electrochimica Acta One-pot sol-gel synthesis of Li4Ti5O12/ C anode materials for high-performance Li-ion batteries,” Electrochim. Acta, vol. 142, pp. 43–50, 2014.
. R. P. Maloney, H. J. Kim, and J. S. Sakamoto, “Lithium titanate aerogel for advanced lithiumion batteries,” ACS Appl. Mater. Interfaces, vol. 4, no. 5, pp. 2318–2321, 2012.
. W. Yao, W. Zhuang, X. Ji, J. Chen, X. Lu, and C. Wang, "Solid-state synthesis of Li4Ti5O12 whiskers from TiO2-B."Materials Research Bulletin, vol. 75. pp. 204-210, 2016
. A. Mahmoud, J. M. Amarilla, and I. Saadoune, “Effect of thermal treatment used in the sol-gel synthesis of Li4Ti5O12 spinel on its electrochemical properties as anode for lithium ion batteries,” Electrochim. Acta, vol. 163, pp. 213–222, 2015.
. C. Zhang, Y. Zhang, J. Wang, D. Wang, D. He, and Y. Xia, “Li4Ti5O12 prepared by a modi fi ed citric acid sol e gel method for lithium-ion battery,” J. Power Sources, vol. 236, pp. 118– 125, 2013.
. Y. C. Kuo, J. Y. Lin, "One-pot sol-gel synthesis of Li4Ti5O12/C anode materials for highperformance Li-ion batteries." Electrochim. Acta, vol. 142, pp.43-50, 2014
. E. S. Endah yuniarti, Joko Triwibowo, “Pengaruh pH , Suhu dan Waktu pada Sintesis LiFePO4/C dengan Metode Sol-Gel Sebagai Material Katoda untuk Baterai Sekunder Lithium,” Berk. MIPA, vol. 23, no. 3, pp. 218–228, 2013.
. X. Sun, M. Hegde, Y. Zhang, M. He, L. Gu, Y. Wang, J. Shu, P. V. Radovanovic, and C. Cui, "Structure and Electrochemical Properties of Spinel Li4Ti5O12 Nanocomposites as Anode for Lithium-Ion Battery." Int. J. Electrochem. Sci., vol. 9, pp. 1586-1596, 2014
. M. G. Verde, L. Baggetto, N. Balke, G. M. Veith, J. K. Seo, Z. Wang and Y. S. Meng, "Elucidating the Phase Transformation of Li4Ti5O12 Lithiation at the Nanoscale,"ACS Nano, vol. 10, pp. 4312- 4321. 2016
. J. Wang, Analytical Electrochemistry, Second., no. 1. New York: Wiley-VCH, 2014.
. K. Wu, J. Yang, X. Y. Qiu, J. M. Xu, Q. Q. Zhang, J. Jin and Q. C. Zhuang, "Study of spinel Li4Ti5O12 electrode reaction mechanism by electrochemical impedance spectroscopy." Electrochim. Acta, vol. 108, pp. 841-851. 2013
. Nordh, Tim. "Li4Ti5O12 as an Anode material for Li Ion Batteries In Situ XRD and XPS Studies". Thesis, Uppsala Universitet. Feb.2013.
. C. Liu, Z. G. Neale, and G. Cao, "Understanding electrochemical potentials of cathode materials in rechargeable batteries."Material Today, vol. 19, pp. 109-123, 2016
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
