THE EFFECT OF CALCINATION ON MICROWAVE ABSORBING PROPERTIES OF Fe3O4/TiO2 COMPOSITE
DOI:
https://doi.org/10.17146/jsmi.2019.20.2.5292Keywords:
RAM(radar absorbing material), composite, titanium, magnetite, calcination effectAbstract
THE EFFECT OF CALCINATION ON MICROWAVE ABSORBING PROPERTIES OF Fe3O4/TiO2 COMPOSITE. The Fe3O4/TiO2 composites have been fabricated by simple precipitation method for microwave absorbing. The obtained powder of Fe3O4/TiO2 which 10 % iron oxide containing were calcinated from 300oC – 700oC for 3 hours. The characteristic of samples was investigated by various techniques. The TEM image showed the composites form agglomeration with particles size of around 20 nm. The all sample contents most of the anatase phase. The increasing of calcination temperature is the bigger of crystallite size. The Raman bands shift towards lower wavenumber and their full-widths at half-maximum (FWHM) of the bands decreases as the particles size increase. The measurement of the magnetic properties illustrated that the Fe3O4/TiO2 exhibited paramagnetic behavior at room temperature. The microwave absorbing properties of the sample was measured by VNA using frequency microwave filter in X-band range (8-12 GHz). The reflection loss (RL) values were calculated for thickness 1 mm of the sample. The minimum reflectivity peak value tends to decrease with the increase of the calcination temperature due to increasing the crystallite size of the particles. The lowest reflectivity value of Fe3O4/TiO2 was occurred calcinated at 600oC with -13.4 dB loss at 10.9 GHz, that is more 80% absorbed of the electromagnetic wave in thickness 1 mm of the sample. The microwave absorption properties the calcinated 700oC the sample decrease due to the loss of magnetic properties of the sample. This study concluded that increase in average crystalline size, microwave absorption properties increased. However, the decrease dratisly of magnetic properties of the sample causes microwave absorption properties to decrease.
Downloads
References
. A. Tennant. “Radar-absorbing Materials”, University of Sheffield, UK, 2014.
. V. L. Soethe, E. L. Nohara, L. C. Fontana, M. C. Rezende, “Radar absorbing materials based on titanium thin film obtained by sputtering technique”, Journal of Aerospace Technology and Management, vol. 3 no. (3), pp. 279–286, 201.
. H. Chongkang, P. Shunkang, C. Lichun, L. Xing, W. Yajun, “Effect of rare earth on microwave absorbing properties of RE-Co alloys”, Journal of Rare Earths, vol. 33, no. 3), pp. 271–277, 2015.
. V. L. Soethe, E. L. Nohara, L. C. Fontana, M. C. Rezende, “Radar absorbing materials based on titanium thin film obtained by sputtering technique”, Journal of Aerospace Technology and Management, vol. 3, no. 3, pp. 279–286, 2011.
. H. Hajimiri, M. S. S. Dorraji, M. H. Rasoulifard, A. R. Amani-Ghadim, M. R. Khoshroo, “Combination of perovskite and magnetic inverse spinel structures to improve microwave absorption properties”, Materials Science and Engineering B, vol. 225, pp. 75-85, 2017.
. D. A. H. Hanaor, C. C. Sorrell, “Review of the anatase to rutile phase transformation”. Journal Materilas Science, vol. 46, pp. 855–874, 2011.
. Y. J. An, H. Okino, T. Yamamoto, S. Ueda, T. Deguchi, “Microwave dielectric properties of lossy dielectric composite material”, Japanese Journal of Applied Physics, vol. 45, no. 9B, 2006.
. C. M. Choi, K. S. Ko, “A study on absorption properties of the EM wave absorber using TiO2 in WBand”. Journal of Navigation and Port Research International Edition, vol. 34, no 2, pp. 111-115, 2010.
. H. M. Xiao, X. M. Liu, S. Y. Fu, “Synthesis, magntic and microwave absorbing properties of core-shell structured MnFe2O4/TiO2 nanocomposites”. Composites Science and Technology, vol. 66, pp. 2003–2006, 2006.
. A. Kumar, V. Agarwala, D. Singh, “Microwave absorbing behavior of metal dispersed TiO2 nanocomposites”, Advanced Power Technology, vol. 25, pp. 483–489, 2014.
. C. L. Zhu, M. L. Zhang, Y. J. Qiao, G. Xiao, F. Zhang, Y. J. Chen, “Fe3O4/TiO2 core/shell nanotubes: synthesis and magnetic and electromagnetic wave absorption characteritics”, Journal of Physic Chemistry C, vol. 114, pp. 16229-16235, 2010.
. Y. Wang, T. Li, L. Zhao, Z. Hu, Y. Gu, “Research progress on nanostructure radar absorbing material”, Energy and Power Engineering, vol. 3, pp. 580-584, 2011.
. Y. Qu, H. Yang, N. Yang, Y. Fan, H. Zhu, G. Zou, “The effect of reaction temperature on the particle size, structure and magnetic properties of coprecipitated CoFe2O4 nanoparticles”, Materials Letters, vol. 60, pp. 3548–3552, 2006.
. A. Kumar, V. Agarwala, D. Singh, “Effect of particles size of BaFe12O19 on the microwave absorption characteristics in X-band”, Progress in Electromagnetic Research M, vol. 29, pp. 223-236, 2013.
. W. A. Adi, A. Fisli, “Efek substitusi Fe2+ dan Fe3+ terhadap struktur Kristal, sifat optik dan magnetik pada nanopartikel anatase Ti1-(%Fe2+)O2”, Jurnal Sains Materi Indonesia, Vol. 19 No 2, pp. 54-60, 2018.
. H. C. Choi, Y. M. Jung, S. B. Kim, “Size effect in the Raman spectra of TiO2 nanoparticles”, Vibrational Spectroscopy, vol. 37, pp. 33-38, 2005.
. F. D. Hardcastle, “Raman spectroscopy of titania (TiO2) nanotubular water-splitting catalysts”, Journal of the Arkansas Academy of Science, vol. 65, pp. 43-48, 2011.
. A. Sutka, S. Lagzdina, T. Kambre, P. Parna, V. Kisand, J. Kleperis, M. Maiorov, A. Kikas, I. Kuusik, D. Jakovlevs, “Study of the structure phase transformation of iron oxide nanoparticles from an Fe2+ ion source by precipitation under various synthesis parameter and temperature”. Materials Chemistry and Physic, vol. 149, pp. 473–479, 2015.
. A. C. F. M. Costa, A. P. Diniz, V. J. Silva, R. H. G. A, Kiminami, D. R. Carnejo, A. M. Gama, M. C. Rezende, L. Gama, “Influence of calcination temperature on the morphology and magnetic properties of Ni-Zn ferrite applied as an electromagnetic energy absorber”, Journal of Alloys and Compounds, 483, 563-565, 2009.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
