SINTESIS SELULOSA-g-ASAM AKRILAT-STIREN SEBAGAI ADSORBEN ION LOGAM

Authors

  • Meri Suhartini Pusat Aplikasi Isotop Radiasi (PAIR) - BATAN, Jl. Lebakbulus Raya No. 49, Jakarta.
  • Nunung Nuryanthi Pusat Aplikasi Isotop Radiasi (PAIR) - BATAN, Jl. Lebakbulus Raya No. 49, Jakarta.

DOI:

https://doi.org/10.17146/jsmi.2017.18.3.4113

Keywords:

Selulosa, Cellulose, Asam Akrilat, Stirena, Styrene, Acrylic Acid, Irradiasi Gamma, Gamma Irradiation, Kobalt-60, Cobalt-60

Abstract

SYNTHESIS OF CELLULOSE-g-ACRYLIC ACID-STYRENE AS METAL ION ADSORBENT. Acrylic acid and styrene were grafted onto cellulose by using gamma rays from cobalt-60 as the initiator. The research aims to improve the physical and chemical properties of grafted copolymer of cellulose-acrylic acid (Cell-g-AA) as Pb2+ metal ion adsorbent. The results showed that the optimum irradiation dose for the grafting of acrylic acid and styrene on the cellulose was achieved at 30 kGy. An improvement of the degree of swelling (%S) of Cell-g-AA from 470% to 89% at simultaneously grafting with irradiation dose of 30 kGy. Characterization of functional groups using Fourier Transform InfraRed Spectroscopy (FT-IR) showed the presence of new spectrum at Cell-g-AA-St. Morphological analysis using Scanning Electron Microscope (SEM) showed that the size of the fiber Cell-g-AA-St was 67% higher than that before the grafting. The results using Energy Dispersive X-Ray Analysis (EDX) showed that metal ions Pb2+, Mn2+dan Ni2+ can be adsorped by the Cell-g AA-St copolymer. The adsorption capability of the copolymer is best on Pb2+, then Ni2+ and the lowest on Mn2+.

ABSTRAK

SINTESIS SELULOSA-g-ASAM AKRILAT-STIREN SEBAGAI ADSORBEN ION LOGAM. Asam akrilat dan stiren dicangkokkan pada selulosa (Sel-g-AA-St ) dengan menggunakan inisiator sinar gamma dari sumber radiasi kobalt-60. Penelitian bertujuan memperbaiki sifat fisik kimia kopolimer cangkok selulosaasam akrilat (Sel-g-AA) sebagai adsorben ion logam. Hasil menunjukkan bahwa dosis iradiasi optimum untuk proses pencangkokan asam akrilat dan stiren pada selulosa dicapai pada 30 kGy. Pada pencangkokan secara
simultan dengan dosis iradiasi 30 kGy, dengan adanya penambahan stiren, terjadi perbaikan derajat pengembangan (%S), %S kopolimer Sel-g-AA yang semula 470% turun menjadi 89%. Pencirian gugus fungsi menggunakan Fourier Transform InfraRed Spectroscopy (FT-IR) menunjukan adanya spektrum baru pada Sel-g-AA-St. Analisis morfologi menggunakan Scanning Electron Microscope (SEM) menunjukan bahwa ukuran serat Sel-g-AA-St menjadi lebih besar 67% dibandingkan selulosa sebelum dimodifikasi. Hasil analisis menggunakan Energy Dispersive Analysis X-Ray (EDX) memperlihatkan bahwa ion logam Pb2+, Mn2+dan Ni2+ dapat terserap oleh kopolimer Sel-g-AA-St. Kemampuan adsorpsi kopolimer tersebut terbaik pada Pb2+, kemudian Ni2+ dan yang terendah pada Mn2+.

 

Downloads

Download data is not yet available.

References

G. Salihoglu and N. K. Salihoglu. “A Review on Paint Sludge from Automotive Industries : Generation, Characteristics and Management.” J. Environ. Manage., vol. 169, pp. 223-235, 2016.

Mulyadi. “Logam Berat Pb pada Tanah Sawah dan Gabah di Sub-Das Juwana Jawa Tengah.” Agrologia, vol. 2, no. 2, pp. 95-101, 2013.

Y. Su, J. Liu, Q. Yue, Q. Li and B. Gao. “Adsorption of Lead and Nickel Ions by Semi-interpenetrating Network Hydrogel Based on Wheat Straw Cellulose: Kinetics, Equilibrium, and Thermodynamics,” J. Soft Material, vol. 13, no. 4, pp. 225, 2015.

M. Sabine and G. Wendy. “Human Health Effects of Heavy Metals.” Environmental Science and Technology Briefs for Citizens, vol. 15, 2009.

M. S.Abdullahi. “Toxic Effects of Lead in Humans : An Overview.” Glo. Adv. Res. J. Environ. Sci. Toxicol., vol. 2, no. 6, pp. 157-162, 2013.

A. A. Alswat, M. Bin Ahmad and T A. Saleh. “Zeolite Modified with Copper Oxide and Iron Oxide for Lead and Arsenic Adsorption from Aqueous Solutions.” J. Water Supply: Research and Technology-AQUA, vol. 65, no. 6, pp. 465-479, 2016.

L. Fan, C. Luo, M. Sun, X. Li and H. Qiu. “Highly Selective Adsorption of Lead Ions by WaterDispersible Magnetic Chitosan/Graphene Oxide Composites.” Colloids and Surfaces B : Biointerfaces, vol. 103, pp. 523-529, 2013.

G. Desmet and Taka. “Cellulose Functionalization via High-Energy Irradiation-Initiated Grating of Glycidylmethacrylate and Cyclodextrinim Mobilization.” Radiation Physics and Chemistry, vol. 80, pp. 1358-1362, 2011.

S. Kalia and M. W. Sahaa. “Polysaccharide Based Graft Copolymers”. Berlin Heidelberg : Chapter 2, 2013.

J. Liu, Q. Li, Y. Su, Q. Yue, B. Gao and R. Wan. “Synthesis of Wheat Straw Cellulose-g-poly (potassium acrylate)/PVA Semi-IPNs Superabsorbent Resin.” Carbohydrate Polymers, vol. 94, no. 1, p. 539, 2013.

S. Kalia, S. Boufi, A. Celli and S. Kango. “Nanofibrilliated cellulose: surface modification and potential applications.” Colloid and Polymer Science, vol. 292, no. 1, p. 5, 2014.

D. Swantomo, Rochmadi, K.T. Basuki and R. Sudiyo. “Synthesis and Characterization of Graft Copolymer Rice Straw Cellulose-Acrylamide

Hydrogels Using Gamma Radiation.” Atom Indonesia, vol. 39, no. 2, p. 57, 2013.

J. Hendri, I. G. Suka, W. Simanjuntak,Anissa dan G. T. Rekso. “Karakteristik Film Polietilen Tergrafting Asam Akrilat Diperoleh dengan Metode Radiasi Gamma.” Prosiding Pusat Penelitian dan Pengembangan Teknologi Isotop dan Radiasi BATAN P3TIR, 2007.

M. Rifaid, B. Pratomo and Sastrowardoyo. “Penyediaan Membran untuk Pengolahan Limbah Bahan Berbahaya dan Beracun Cair dengan Metode Pencangkokan Asam Akrilat pada Polipropilen dan Polietilen Pasca Iradiasi Sinar Gamma.” Prosiding Pusat Teknologi Limbah Radioaktif, 2005.

Rahmawati, M. Suhartini, E. Budianto. “Radiation Graft Copolymerization ofAcrylic Acid onto Rice Straw Cellulose.” Macromolecular Symposia Journal, vol. 353, pp. 231-239, 2015.

H. Kang, R. Liu and Y. Huang, “Graft Modification of Cellulose: Methods. Properties and Applications.” Polymer, vol. 70, pp.A1-A16, 2015.

S. Hokkanen, A. Bhatnagar and M. Sillanpaa. “A Review on Modification Methods to CelluloseBased Adsorbents to Improve Adsorption Capacity.” Water Research, vol. 91, pp. 156-173, 2016.

M. Suhartini. “Pencangkokan Secara Radiasi Asam Akrilat pada Selulosa dengan Keberadaan Metil Metakrilat.” Jurnal Iptek Nuklir Ganendra, vol. 19, no. 1, pp. 15-25, 2016.

G. Fan, M. Wang, C. Liao, T. Fang, J. Li and R. Zhou. “Isolation of Cellulose from Rice Straw and Its Conversion into Cellulose Acetate Catalyzed by Phosphotungstic Acid.” Carbohydrate Polymers, vol. 94, no. 1, pp. 71-76, 2013.

T. Yamaki. “Quantum-beam TechnologyAVersatile Tool for Developing Polymer Electrolyte Fuel-Cell Membranes.” J. Power Sources, vol. 195, p. 5848, 2010.

J. M. Nolle, S. Primpke, K. Mullen, P. Vana and D. Woll. “Diffusion of Single Molecular and Macromolecular Probes during the Free Radical Bulk Polymerization of MMA - Towards a Better Understanding of the Trommsdorff Effect on a Molecular Level.” Polymer Chemistry, vol. 7, pp. 4100-4105, 2016.

D. K. Garg, C. A. Serra, Y. Hoarau, D. Parida, M. Bouquey, and R. Muller. “Analytical Solution of Free Radical Polymerization: ApplicationsImplementing Gel Effect Using CCS Model.” Macromolecules, vol. 47, no. 23, pp. 8178-8189, 2014.

P. Lu and Y-Lo Hsieh. “Preparation and Characterization of Cellulose Nanocrystals from Rice Straw.” Carbohydrate Polymers, vol. 87, no. 1, pp. 564-573, 2012.

Y. Bhardwaj, M. Tamada, Y. C. Nho, M. Nasef and O. Guven. “Harmonized Protocol for RadiationInduced Grafting.” Workshop on Harmonized Radiation Graft Protocol, 2014.

J. Heath and N. Taylor. Energy Dispersive Spectroscopy. West Sussex: John Wiley & Sons Ltd, 2015, vol. 2.

Downloads

Published

30-04-2017

How to Cite

Meri Suhartini, & Nunung Nuryanthi. (2017). SINTESIS SELULOSA-g-ASAM AKRILAT-STIREN SEBAGAI ADSORBEN ION LOGAM. Jurnal Sains Materi Indonesia, 18(3), 101–108. https://doi.org/10.17146/jsmi.2017.18.3.4113