SYNTHESIS, STRUCTURAL ANALYSIS AND INITIAL ELECTRIC SCRATCHING ON PbZrXTi(1-X)O3 PIEZOELECTRIC MATERIAL
DOI:
https://doi.org/10.17146/jsmi.2018.20.1.4798Keywords:
PbZrxTi(1-x)O3 Piezoelectric material, d33 Piezoelectric constantAbstract
SYNTHESIS, STRUCTURAL ANALYSIS AND INITIAL ELECTRIC SCRATCHING ON PbZrXTi(1-X)O3 PIEZOELECTRIC MATERIAL. PbZrTi(1-x)O3(PZT) material is currently one of the highest- quality piezoelectric materials and has been widely used in various applications, including as sensors in the observation system in nuclear reactor cores. In this study, a solid state reaction method was used to synthesize PbZrTi(1-x)O3(PZT) material with variations in compaction pressure of 7000 and 5000 psi. The sample synthesized was analyzed by the crystal structure system using Rietveld method of X-ray diffraction (XRD) pattern. The fitting results from Highscore program showed compounds with perovskite crystals system of tetragonal (PbZr0.52Ti0.48O3) and rhombohedral (PbZr0,58Ti0,42O3) and PbTiO3 (tetragonal). The electrifying process using an electrical voltage of kv DC has been successfully carried out on synthesis products. The voltage source used is from the electronic circuit Television (TV) 14-21 inches which has a flyback component and then continues with a voltage drop by making a voltage divider. The polling results can be identified by measuring the piezoelectric constant with the d33 meter device. Optimization of polling parameters to the material temperature was obtained at 100 oC, then applied polling sample of PbZrTi(1-x)O3(PZT) material added by PVDF (1.5, 2.5 and 5% weight percent) to samples with the compaction of 7000 and 5000 psi. Maximum d33 measurement (61 x 10-12 C/N) was obtained on PZT material with a pellet pressure of 7000 psi. Increasing the addition of PVDF results in a reduction of d33.
Downloads
References
. Y. Zhang, M Xie, J Roscow, Y Bao, K Zhou, D Zhang, and CR Bowen. “Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications,” J. Mater. Chem. A, vol. 5, no. 14, pp. 6569–6580, 2017.
. G. Haertling. “Ferroelectric ceramics: history and technology,” J. Am. Ceram. Soc., vol. 82, no. 4, pp. 718–818, 1999.
. W. C. Yap, H. Jiang, J. Liu, Q. Xia, and W. Zhu. “Ferroelectric transistors with monolayer molybdenum disulfide and ultrathin aluminum doped hafnium oxide,” Appl. Phys. Lett., vol. 111, no. 1, 2017.
. B. T. Reinhardt, A. Suprock, and B. Tittmann. “Testing piezoelectric sensors in a nuclear reactor environment,” AIP Conf. Proc., vol. 1806, 2017.
. B. Lin, M. Gresil, V. Giurgiutiu, T. Knight, A. E. Mendeztorres, and L. Yu. “Nuclear environmental effects on piezoelectric wafer active sensors based acousto ultrasonic sensing system,” pp. 2234– 2239, 2014.
. R. Armiento, B. Kozinsky, G. Hautier, M. Fornari, and G. Ceder. “High throughput screening of perovskite alloys for piezoelectric performance and thermodynamic stability,” Phys. Rev. B - Condens. Matter Mater. Phys., vol. 89, no. 13, pp. 1–9, 2014.
. J. Sirohi and I. Chopra. “Fundamental understanding of piezoelectric strain sensors,” J. Intell. Mater. Syst. Struct., vol. 11, no. 4, pp. 246– 257, 2000.
. S. Ahda. “Pengaruh Tekanan dan Suhu Sintering pada Proses Sintesa bahan Piezoelektrik KNN dengan Menggunakan Metoda Solid State Reaction,” Pros. Semin. Nas. XVIII Kim. dalam Pembangunan, Jar. Kerjasama Kim. Indones., vol. 54, pp. 385–392, 2015.
. S. Ahda and Mardiyanto. “Pola Difraksi Sinar-X Produk Sintesis Bahan Piezoelektrik PbZrxTi(1-x)O3 dengan Metoda Solid State reaction, Jurnal Sains Materi Indonesia,” J. Sains Mater. Indones., no. Edisi Khusus, 2009.
. C.-G. Wu, G.-Q. Cai, W.-B. Luo, Q.-X. Peng, X.-Y. Sun, and W.-L. Zhang. “Enhanced pyroelectric properties of PZT/PVDF-TrFE composites using calcined PZT ceramic powders,” J. Adv. Dielectr., vol. 03, no. 01, p. 1350004, 2013.
. K. M. Habsari and D. J. H. S. Djoko. “Metode Flyback pada Pembangkitan Tegangan Tinggi untuk Aplikasi Plasma Electrolytic Oxidation,” Jnteti, vol. 6, no. 3, pp. 374–379, 2017.
. C. T. Kniess, J. C. de Lima, and P. B. Prates. The Quantification of Crystalline Phases in Materials: Applications of Rietveld Method , Sintering - Methods and Products, Dr. Volodymyr Shatokha (Ed.), InTech. 2012.
. Z. De-Qing, W. Da-Wei, Y. Jie, Z. Quan-Liang, W. Zhi-Ying, and C. Mao-Sheng. “Structural and Electrical Properties of PZT/PVDF Piezoelectric Nanocomposites Prepared by Cold-Press and HotPress Routes,” Chinese Phys. Lett., vol. 25, no. 12, p. 4410, 2008.
. R. Gupta, S. Verma, D. Singh, K. Singh, and K. K. Bamzai. “Effect of Ni/Nb on structure, electrical and ferroelectric properties of 0.5PNN-0.5PZT ceramics,” Process. Appl. Ceram., vol. 9, no. 1, 2015.
. B. Jaffe, W. Cook, and H. Jaffe. Piezoelectric Ceramics. New York: Academic, 1971.
. T. R. Shrout and S. J. Zhang. “Lead-free piezoelectric ceramics: Alternatives for PZT?,” J. Electroceramics, vol. 19, no. 1, pp. 111–124, 2007.
. S. V.A. Pengaruh komposisi Sn dan variasi kompaksi terhadap densitas dan modulus elastisitas pada MMC Pb-Sn untuk core proyektil peluru denngan proses metalurgi Serbuk. Surabaya: Institut Teknologi Surabaya, 2012.
. S. J. Kim. “Preparation of Indium Tin Oxide Thin Film,” pp. 6529–6542, 2016.
. Junaedi and D. Nurmayady. “Perancangan Pembangkit Tegangan Tinggi Direct Current pada Electro Electrospinning,” Majalah Pengelolaan Industri nuklir No. 09 – 10 / Tahun V, 2012.
. J. N. A. Prakosa, M. Facta, and M. A. Riyadi, “Perancangan Pembangkit Tegangan Tinggi Impuls Berbasis Konverter Flyback,” TRANSMISI, vol. 17, no. 2, p. 64, 2015.
. A. Ashari, A. Syakur, and B. Winardi. “Analisa Pengaruh Kontaminan Pantai terhadap Unjuk Kerja Sampel Isolator Bahan Keramik Sebelum dan Sesudah Dilapisi Minyak Silikon,” TRANSMISI, vol. 14, no. 4, p. 136, 2012.
. F.-Z. Yao, K. Wang, W. Jo, J.-S. Lee, and J.-F. Li. “Effect of poling temperature on piezoelectricity of CaZrO 3 -modified (K, Na)NbO 3 -based leadfree ceramics,” J. Appl. Phys., vol. 116, no. 11, p. 114102, 2014.
. Q. Guo, G. Z. Cao, and I. Y. Shen. “Measurements of Piezoelectric Coefficient d 33 of Lead Zirconate Titanate Thin Films Using a Mini Force Hammer,” J. Vib. Acoust., vol. 135, no. 1, p. 011003, 2013.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
