PROPOSED MODEL FOR GRAIN ALIGNMENT IN YBa2Cu3O7-x SUPERCONDUCTORS PREPARED BY MELT PROCESSING

Authors

  • Aristianto M.M.B. Center for Ceramic-DEPERIN 392, Achmad Yani Street, Bandung, Indonesia

DOI:

https://doi.org/10.17146/jsmi.2009.11.1.4548

Keywords:

Model, Grain alignment, Melt processing, Capillary, Sympathetic nucleation

Abstract

PROPOSED MODEL FOR GRAIN ALIGNMENTIN YBa2Cu3O7-x (123) SUPERCONDUCTORS PREPAREDBYMELTPROCESSING. Amodel for grain alignment in YBa2Cu3O7-x is proposed. The proposed model is based on experimental results that the grain alignment in coarse samples with average grain diameter of 57 μm is higher than that of fine samples with average grain diameter of 1.6 μm which were prepared bymelt processing. Other evidence, supported the proposed model, is the difference inmicrostructure of both samples, i.e. the grain in the fine samples tend to form domain-like structure, while in the coarse sample some large grain randomly oriented in the bulk and some grain aligned on the surface. The alignment of grain in coarse sample is due to capillary mechanism while in the fine samples the alignment could be due to capillary mechanism or sympathetic nucleation.

Downloads

Download data is not yet available.

References

. W.M. YANG, et al, Brazilian Journal of Physics,

(3) (2002) 763-767

. W.M.YANG, et al, Physica C, 307 (3-4) (1998) 271-

. N. KAUSAR, S.A. SIDDIQI and A. MAQSOOD,

Turki J. Phy, 25 (2001) 53-62

. Y.X. ZHOU, et al, IEEE Transaction on Applied

Superconductivity, 13 (2) (2003) 3072-3075

. C.V. THOMPSON, J. Appl. Phys., 58 (2) (1985)

-772

. C.A. BATEMAN, et al, J.Am. Ceram. Soc., 75 (5)

(1992)1281-1283

. S. JIN, et al., Physica C, 198 (1992) 333-340

. E.S.K. MENON and H.I. AARONSON, Acta

Metall., 35 (3) (1987) 549-563

. M.A. RODRIGUEZ, B.J. CHEN, R.L. SNYDER,

Physica C, 195 (1992) 185-194

. H. HOJAJI, et al, J. Mater. Res., 5 (4) (1990)

-730

. S.JIN and J.E. GRAEBNER., Mater. Sci. Eng., B7

(1991)243-260

. B.J. CHEN, et. al., Physica C, 198 (1992) 118-124

. S. KUHARUANGRONG and J.A.T. TAYLOR,

J. Am. Ceram. Soc., 74 (8) (1991) 1964-1969

. A.F. HEPP, CrystalliteAlignment of Polycrystalline

Ba2YCu3O7-x, in Ceramic Superconductors II,

edited by M.F. Yan, The American Ceramics

Society, Inc., Westerville, OH, (1988) 356-366

. R.B.VAN DOVER, Superconductivity: High Critical

Currents, Proceeding of The First Annual

Cambridge Conference on Commercial

Applications of Superconductivity, Vol 2., Edited

by S.E. SKOU, World Tech Press, Cambridge,M.A.,

(1988)236-282

. ARISTIANTO MMB, J. Sains Mater Indonesia,

(2) (2009) 142-148

. W. KURZ and D.J. FISHER, Fundamentals of

Solidification, Trans Tech Publications,

Aedermannsdorf, (1984)

. R.M. GERMAN, Liquid Phase Sintering, Plenum

Press, NewYork, (1985)

. D.L. KAISER, et. al., J. Crystal Growth, 85 (1987)

-598

. S. NAKAHARA, J. Crystal Growth, 85 (1987)

-651

. A. K. VENEVA, Physica Status Solidi, 2 (5) (2005)

-1719

. J.W. CAHN and R.B. HEADY, J. Am. Ceram. Soc.,

(7) (1970) 406-409

. S.JIN, et. al., Physica C, 181 (1991) 57-62

Downloads

Published

31-10-2009

How to Cite

Aristianto M.M.B. (2009). PROPOSED MODEL FOR GRAIN ALIGNMENT IN YBa2Cu3O7-x SUPERCONDUCTORS PREPARED BY MELT PROCESSING. Jurnal Sains Materi Indonesia, 11(1), 26–32. https://doi.org/10.17146/jsmi.2009.11.1.4548