SYNTHESIS AND CHARACTERIZATION OF GRAPHENE FROM COCONUT FIBER (COCOS NUCIFERA) AS ANODE MATERIALS FOR LI-ION BATTERY

Authors

  • Gunawan Center for Science and Technology of Advanced Materials, National Nuclear Energy Agency
  • Wagiyo Center for Science and Technology of Advanced Materials, National Nuclear Energy Agency
  • Sugeng Center for Science and Technology of Advanced Materials, National Nuclear Energy Agency
  • Sudaryanto Center for Science and Technology of Advanced Materials, National Nuclear Energy Agency

DOI:

https://doi.org/10.17146/jsmi.2019.20.3.5475

Keywords:

hydrothermal, pyrolysis, coconut fiber, anode, battery, Li-ion

Abstract

Synthesis of graphene from coconut fiber conducted in two stages. The first stage is heating the powder of coconut fiber that passes 325 meshes by hydrothermal method at 200o C for 4 hours. Furthermore, the pyrolysis then treated at temperature of 1000° C for 2 hours. The grain size and surface morphology from graphene observed using SEM in the 1000X magnification. From the SEM image of graphene, it shows the pattern of several thick layers build mutual three-dimensional, forming a flake structure. Observations also show stacks of graphene structure with more big flakes forming a thick pallet. Another characterization was performed by using X-ray diffractometer (XRD), Raman Spectrometer and LCR meter. From XRD observation there is an amorphous pattern at the first stage of synthesis, after pyrolysis at 1000o C for 2 hour a peak near 2θ = 24o, 42oand 52o which corresponds to crystal indexes (002), (400) and (511) became visible. The peak at around 1350 cm-1 in the Raman is the D band. The D band is represented defects, like disruption in the sp2 bonding because of heptagon and pentagon rings, vacancies, edge effect, and etc. DC conductivity or bulk electrical conductivity of about 4.6 x 10-3 Scm-1.

Downloads

Download data is not yet available.

References

. S. Sheshmani and M. A. Fashapoyeh, “Suitable

Chemical Methods for Preparation of Graphene

Oxide, Graphene and Surface Functionalized

Graphene Nanosheets,” pp. 813-825, 2013.

. B. D. Ossonon and D. Bélanger, “Functionalization

of graphene sheets by the diazonium chemistry

during electrochemical exfoliation of graphite,”

Carbon N. Y., vol. 111, pp. 83-93, 2017.

. A. K. Geim, “ Graphene: Status And Prospects,”

Prospects, vol. 324, pp. 1-8, 2009.

. B. Ankamwar and F. Surti, “Water Soluble Graphene

Synthesis,” Chem. Sci. Trans., vol. 1, no. 3, pp.

-507, 2012.

. K. Dissanayake, W. R. de Silva, A. Kumarasingha,

and K. N. de Silva, “Synthesis of Graphene and

Graphene Oxide Based Nanocomposites,” in

SAITM Research Symposium on Engineering

Advancements 2014, 2014, vol. 2014, pp. 75-78.

. C. Xiu-Yun, “Graphene-like nanosheets

synthesized by natural flaky graphite in Shandong,

China,” Int. Nano Lett., vol. 3, pp. 6-10, 2013.

. B. Huang et al., “A free-standing electrochemical

sensor based on graphene foam-carbon nanotube

composite coupled with gold nanoparticles and

its sensing application for electrochemical

determination of dopamine and uric acid,”

J. Electroanal. Chem., vol. 801, no. May, pp. 129-

, 2017.

. J. Zhu, R. Duan, S. Zhang, N. Jiang, Y. Zhang, and

J. Zhu, “The application of graphene in lithium ion

battery electrode materials.,” Springerplus, vol. 3,

no. 1, p. 585, 2014.

. K. Leng et al., “Graphene-based Li-ion hybrid

supercapacitors with ultrahigh performance,” Nano

Res., vol. 6, no. 8, pp. 581-592, 2013.

B. Lung-Hao Hu, F.-Y. Wu, C.-T. Lin, A. N.

Khlobystov, and L.-J. Li, “Graphene-modified

LiFePO4 cathode for lithium ion battery beyond

theoretical capacity,” Nat. Commun., vol. 4, 2013.

X. Li et al., “Large-Area Synthesis of High-Quality

and Uniform Graphene Films on Copper Foils,”

Science (80-. )., vol. 324, no. 5932, pp. 1312–1314,

Jun. 2009.

Y. Long, Y. Shu, X. Ma, and M. Ye, “In-situ

synthesizing superior high-rate LiFePO4/C

nanorods embedded in graphene matrix,”

Electrochim. Acta, vol. 117, pp. 105–112, 2014.

Y. Zhang, W. Wang, P. Li, Y. Fu, and X. Ma, “A

simple solvothermal route to synthesize graphenemodified LiFePO 4 cathode for high power lithium

ion batteries,” J. Power Sources, 2012.

. J. Hassoun et al., “A lithium-ion battery based on

a graphene nanoflakes ink anode and a lithium iron

phosphate cathode,” Rome.

. H. Xu, J. Chang, J. Sun, and L. Gao, “Grapheneencapsulated LiFePO4 nanoparticles with high

electrochemical performance for lithium ion

batteries,” Mater. Lett., vol. 83, pp. 27–30, 2012.

. J. Mun, H. W. Ha, and W. Choi, “Nano LiFePO4 in

reduced graphene oxide framework for efficient

high-rate lithium storage,” J. Power Sources, vol.

, pp. 386–392, 2014.

. N. Li et al., “Preparation of magnetic CoFe2O4-

functionalized graphene sheets via a facile

hydrothermal method and their adsorption

properties,” J. Solid State Chem., vol. 184, no. 4,

pp. 953-958, 2011.

. C. L. Yuxi Xu, Kaixuan Sheng and G. Shi, “SelfAssembled Graphene Hydrogel,” ACS Nano, vol.

, no. 7, pp. 4324-4330, 2010.

. D. N. Jayanti et al., “Defect and Magnetic

Properties of Reduced Graphene Oxide Prepared

from Old Coconut Shell Defect and Magnetic

Properties of Reduced Graphene Oxide Prepared

from Old Coconut Shell,” IOP Conf. Ser. Mater.

Sci. Eng., vol. 196, 2017.

. H. Jodi, A. Zulfia, Deswita, and E. Kartini, “A Study

of The Structural and Electrochemical Properties

of Li3PO4-MMT-PVDFComposites for Solid

Electrolytes,” IJTech, pp. 1291-1300, 2016.

Downloads

Published

30-04-2019

How to Cite

Indra Gunawan, Wagiyo H, Bambang Sugeng, & Sudaryanto Sudaryanto. (2019). SYNTHESIS AND CHARACTERIZATION OF GRAPHENE FROM COCONUT FIBER (COCOS NUCIFERA) AS ANODE MATERIALS FOR LI-ION BATTERY. Jurnal Sains Materi Indonesia, 20(3), 93–97. https://doi.org/10.17146/jsmi.2019.20.3.5475