FABRICATION AND CHARACTERIZATION OF STARCH BASED BIOPLASTICS WITH PALM OIL ADDITION
DOI:
https://doi.org/10.17146/jsmi.2019.20.3.4846Keywords:
Bioplastik, Pati, Palm Oil, KarakterisasiAbstract
In this work, starch-based bioplastics in advancing its properties were positively arranged with the addition of palm oil. Starch-based bioplastics were produced by dry blending method and compression technique with mixing starch and glycerol (3:1, w/w) then adding palm oil at various concentration (0%, 2.5%, 5% and 7.5% w/w). Morphology of bioplastics presented that palm oil wrapped bioplastics granules which influenced hydrophobicity properties of bioplastics compared by increasing contact angle of bioplastics from 45.950 (0% of palm oil) to 61.980 (5% of palm oil). This result indicated that the addition of palm oil could develop the properties of bioplastics to hold absorbing water molecules. Moreover, the melting point of bioplastics also affected shifting temperature from 1150 C to be 1000 C that could save the energy needed during heating process. FTIR analysis showed that C=O group at wavenumber 1747 cm-1 was dependable the interaction between starch-glycerol and palm oil. Furthermore, the addition of palm oil would accelerate the biodegradation process. Although the mechanical properties of bioplastics have not increased, the addition of palm oil on bioplastics fabrication is an alternative to improve the characteristic of bioplastics, especially physical, thermal, hydrophobicity and biodegradation properties.
Downloads
References
. R. F. T. Stepto, “Thermoplastic Starch,” Macromol.
Symp., vol. 152, pp. 73–82, 2000.
. M. Kaseem, K. Hamad, and F. Deri, “Thermoplastic
starch blends: A review of recent works,” Polym.
Sci. Ser. A, vol. 54, no. 2, pp. 165–176, 2012.
. H. B. Lee, B. S. Noh, and S. C. Min, “Listeria
monocytogenes inhibition by defatted mustard
meal-based edible films,” Int. J. Food Microbiol.,
. L. T. Hawa and I. Thohari, “Pengaruh pemanfaatan
jenis dan konsentrasi lipid terhadap sifat fisik
edible film komposit whey-porang,” J. Ilmu-Ilmu
Peternekan, vol. 23, no. 1, pp. 35–43, 2013.
. S. Aripin, B. Saing, and E. Kustiyah, “Studi
Pembuatan Bahan Alternatif Plastik Biodegradable
dari Pati Ubi Jalar dengan Plasticizer Gliserol
dengan Metode Melt Intercalation,” J. Tek. Mesin,
vol. 06, pp. 79–84, 2017.
. Y. R. Hasanah and Haryanto, “Pengaruh
Penambahan Filler Kalsium Karbonat (CaCO3) Dan
Clay Terhadap Sifat Mekanik Dan Biodegradable
Plastik Dari Limbah Tapioka,” Techno, vol. 18, no.
, pp. 96–107, 2017.
. J. A. Mbey, S. Hoppe, and F. Thomas, “Cassava
starch-kaolinite composite film. Effect of clay
content and clay modification on film properties,”
Carbohydr. Polym., vol. 88, no. 1, pp. 213–222, 2012.
. Waryat, M. Romli, A. Suryani, I. Yuliasih, and S. J.
A. Nasiri, “Pemanfaatan Pati Termoplastik Sebagai
Bahan Baku Plastik Kemasan Ramah Lingkungan,”
Bul. Pertan. Perkota., vol. 4, no. 1, pp. 37–48, 2014.
. K. S. Lim et al., “A review of application of
ammonium polyphosphate as intumescent flame
retardant in thermoplastic composites,” Compos.
Part B Eng., 2016.
. N. St-Pierre, B. D. Favis, B. a Ramsay, J. a Ramsayt,
and H. Verhoogt, “Processing and characterization
of thermoplastic starch / polyethylene blends,”
Polymer (Guildf)., vol. 38, no. 3, pp. 647–655, 1997.
. A. K. Bledzki and J. Gassan, “Composites reinforced
with cellulose based fibres,” Prog. Polym. Sci.,
. C. Zhuang et al., “Development and
characterization of nano-bilayer films composed
of polyvinyl alcohol, chitosan and alginate,” Food
Control, vol. 86, pp. 191–199, 2018.
. Fauziati, Y. Adiningsih, and A. Priatni,
“Pemanfaatan stearin kelapa sawit sebagai edible
coating buah jeruk,” J. Ris. Teknol. Ind., vol. 10,
no. 1, pp. 64–69, 2016.
. P. Putro, “Kemasan Edible Antimokroba dan
Aplikasinya,” pp. 73–79, 2013.
. B. Santoso, “Development of Edible Film by Using
Modified Cross-Linking Ganyong Starch,” J.
Teknol. Dan Ind. Pangan, no. Vol 22, No 2 (2011):
Jurnal Teknologi dan Industri Pangan, p. 105, 2011.
. H. D. Rozman, A. Zainal, M. Ishak, and U. S. Ishiaku,
“Oil Palm Fiber-Thermoplastic Composites,” in
Natural fibers, biopolymers, and biocomposites,
, pp. 407–434.
Ridwansyah, M. Z. Nasution, T. C. Sunarti, and A.
M. Fauzi, “Karakteristik Sifat Fisiko-Kimia Pati
Kelapa Sawit,” J. Teknol. Ind. Pertan., vol. 17, no.
, pp. 1–6, 2007.
Harianto, J. M. Djafar, and H. Adinegoro,
“Pengaruh penambahan minyak sawit terhadap
karakteristik edible film dan daya simpan bumbu
mie instant,” J. Stand., vol. 19, no. 1, pp. 39–46,
. V. Liaotrakoon and P. Raviyan, “Modifying the
properties of whey protein isolate edible film by
incorporating palm oil and glycerol,” vol. 40, no. 1,
pp. 243–249, 2018.
. B. Santoso, D. Amilita, G. Priyanto, H. Hermanto,
and S. Sugito, “Pengembangan Edible Film
Komposit Berbasis Pati Jagung dengan
Penambahan Minyak Sawit dan Tween 20,”
Agritech, vol. 38, no. 2, p. 119, 2018.
. K. Kaur, P. Ahluwalia, and H. Singh, “Cassava:
Extraction of starch and utilization of flour in bakery
products,” Int. J. Food Ferment. Technol., vol. 6,
no. 2, p. 351, 2017.
. Made Dirgantara, Miko Saputra, “Karakterisasi
Mekanik Biokomposit Klobot Jagung Sebagai
Bahan Dasar Plastik Biodegradable,” 2017.
. M. Chiumarelli and M. D. Hubinger, “Stability,
solubility, mechanical and barrier properties of
cassava starch - Carnauba wax edible coatings to
preserve fresh-cut apples,” Food Hydrocoll., 2012.
. A. G. Peña et al., “Fourier transform infraredattenuated total reflectance (ftir-atr) spectroscopy
and chemometric techniques for the determination
of adulteration in petrodiesel/biodiesel blends,”
Quim. Nova, vol. 37, no. 3, pp. 392–397, 2014.
. Y. B. Che Man, A. M. Marina, A. Rohman, H. A. AlKahtani, and O. Norazura, “A fourier transform
infrared spectroscopy method for analysis of palm
oil adulterated with lard in pre-fried french fries,”
Int. J. Food Prop., vol. 17, no. 2, pp. 354–362, 2014.
. B. Santoso, F. Pratama, B. Hamzah, and R.
Pambayun, “Pengembangan Edebli Film dengan
Menggunakan Pati Ganyong Termodifikasi Ikatan
Silang,” J. Teknol. dan Ind. Pangan, vol. XXII,
no. 2, pp. 105–109, 2011.
. P. Zhang, Y. Hu, L. Song, J. Ni, W. Xing, and J.
Wang, “Effect of expanded graphite on properties
of high-density polyethylene/paraffin composite
with intumescent flame retardant as a shapestabilized phase change material,” Sol. Energy
Mater. Sol. Cells, 2010.
. H. Park, “Edible Coatings and Films to Improve
Food Quality,” Trends Food Sci. Technol., 1995.
. G. Bracco and B. Holst, Surface science
techniques, vol. 51, no. 1. 2013.
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.





