EFFECT OF H2O2 AND MnO2 AS OXIDATORS OF GOLD AND COPPER LEACH PROCESSES FROM PRINTED CIRCUIT BOARDS
DOI:
https://doi.org/10.17146/jsmi.2019.20.3.4710Keywords:
Oxidizing, Leaching, HCL, Printed Circuit BoardAbstract
In general, electronic waste management in the form 2 of printed circuit boards (printed circuit boards/PCBs) is carried out by the process of removing components and taking precious metals that are easily recycled. However, in Indonesia, the recycling process for extracting precious metals has not been much processed, even though they contain precious metals such as copper and gold. This research was conducted to find a more economical and environmentally friendly treatment process by using an oxidizer of Hydrogen Peroxide (H2O2) and Manganese Oxide (MnO2) and reducing the level of HCl used. Observation of metal leaching results using Atomic Adsroption Spectroscopy (AAS) showed the value of recovery (recovery) of gold and copper reached 59.1% and 59.8% for 0.5M HCl + 2.5% H2O2. However, the recovery value of copper has reached its optimum point at the addition of 1.5% H2O2. The use of 3% & 5% MnO2 results in recovery values of 12% and 24% for gold and copper. Observation of the cross section shows the dissolution of the copper metal from the PCB and accompanied by a change in the color of the solution from clear to green, the more concentrated the more the amount of dissolved copper metal shows the characteristic of CuCl solution. The results of the comparison of the two types of oxidizers show that H2O2 is better than MnO2 in producing higher Cu and Au metals more than 3 times.Downloads
References
. S. Harjanto, Y. Cao, A. Shibayama, I. Naitoh, T.
Nanami, K. Kasahara, Y. Okumura, K. Liu, T. Fujita,
Leaching of Pt, Pd and Rh from Automotive Catalyst
Residue in Various Chloride Based Solutions,
MATERIALS TRANSACTIONS 47(1) (2006)
-135.
. I. Rodliyah, N. Ardha, N. Saleh, S.J.J.T.M.d.B.
Sariman, Ekstraksi Emas dari Lumpur Anoda
Melalui Proses Klorinasi Basah dan Ekstraksi
Pelarut, 13(2) (2017) 99-111.
. H. Kamran Haghighi, D. Moradkhani, B. Sedaghat,
M. Rajaie Najafabadi, A. Behnamfard, Production
of copper cathode from oxidized copper ores by
acidic leaching and two-step precipitation followed
by electrowinning, Hydrometallurgy 133 (2013)
-117.
J. Ficeriova, P. Balaz, E. Gock, Leaching of gold,
silver and accompanying metals from circuit boards
(PCBs) waste, Acta Montan Slovaca 16(2) (2011)
-131.
. P.M.H. Petter, H.M. Veit, A.M. Bernardes,
Evaluation of gold and silver leaching from printed
circuit board of cellphones, Waste Manage 34(2)
(2014) 475-482.
. A. Akcil, C. Erust, C.S. Gahan, M. Ozgun, M. Sahin,
A. Tuncuk, Precious metal recovery from waste
printed circuit boards using cyanide and noncyanide lixiviants - A review, Waste Management
(2015) 258-271.
. F. Bisceglie, D. Civati, B. Bonati, F.D. Faraci,
Reduction of potassium cyanide usage in a
consolidated industrial process for gold recovery
from wastes and scraps, Journal of Cleaner
Production 142 (2017) 1810-1818.
. D.G. Dixon, D.D. Mayne, K.G. Baxter, Galvanox™ -
A Novel Galvanically-Assisted Atmospheric
Leaching Technology For Copper Concentrates,
Canadian Metallurgical Quarterly 47(3) (2008)
-336.
. H. Nakazawa, S. Nakamura, S. Odashima, W.
Hareyama, Effect of carbon black to facilitate
galvanic leaching of copper from chalcopyrite in
the presence of manganese(IV) oxide,
Hydrometallurgy 163 (2016) 69-76.
. H. Nakazawa, Effect of carbon black on
chalcopyrite leaching in sulfuric acid media at 50/
°C, Hydrometallurgy 177 (2018) 100-108.
. P. Ter Teo, A.A. Seman, P. Basu, N.M. Sharif,
Characterization of EAF Steel Slag Waste: The
Potential Green Resource for Ceramic Tile
Production, Procedia Chemistry 19 (2016) 842-846.
. W.D. Bancroft, H.W. Rogers, The Colors of the
Copper Salts, The Journal of Physical Chemistry
(8) (1932) 1061-1073.
. N. Geoffroy, F. Cardarelli, A method for leaching or
dissolving gold from ores or precious metal scrap,
JOM 57(8) (2005) 47.
. Z. Wang, S. Guo, C. Ye, Leaching of Copper from
Metal Powders Mechanically Separated from
Waste Printed Circuit Boards in Chloride Media
Using Hydrogen Peroxide as Oxidant, Procedia
Environmental Sciences 31 (2016) 917-924.
. Y. He, Z. Xu, Recycling gold and copper from waste
printed circuit boards using chlorination process,
RSC Advances 5(12) (2015) 8957-8964.
Downloads
Published
How to Cite
Issue
Section
License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.





