24-CHROMIUM FERRITIC STEEL MAGNETIC PROPERTIES
DOI:
https://doi.org/10.17146/jsmi.2014.15.4.4336Keywords:
Ferritic, Steel, Magnetic, Remanent induction, Coercive forteAbstract
24-CHROMIUM FERRITIC STEEL MAGNETIC PROPERTIES. A 24-chromium ferritic stainless steel had been made by foundry methods. The purpose of this investigation is to investigate the magnetic behavior of this ferritic sample, as one of the divvy of its characteristics. Some of supporting data used to prove that the material sample was ferritic type and followed by hysteresis curve obtained from the experiment. By Vibrating Sample Magnetometer (VSM) equipment, it is found that the ferritic steel has the saturation induction around of 150 emu g-1, with the coercive force Hc is close to 3 x 10-4 T and the remanent induction Br is close to 1,1 x 10-3 emu g-1 meanwhile by permagraph equipment the saturation induction around of 3.13 kG, and the coercive force HcB is equal to 0.005 kOe and the remanent induction Br is 0.23 kG with the dissipasion energy BHmax zero, explains that the ferritic stainless steel has a relative good magnetic behavior with relative high magnetization at the relative weak external magnetic field and can be demagnetized easily, appropriate to soft magnetic materials.Downloads
References
. T. Darwinto andA. K. Jahja, “Analisis Strukturmikro
dan Struktur Kristal Feritik F1”, Jurnal Sains
Materi Indonesia, vol. 11, no. 3, pp. 202-206, 2010.
. N. Effendi, “Austenitic Type Stainless Steel
Production By Foundry Technology”, Jurnal
Urania, vol. 16, no. 2, pp. 69-77, 2010.
. K. H. Lo, C. H. Shek, and J. K. L. Lai, “Recent
developments in stainless steels,” Mater. Sci. Eng.
R Reports, vol. 65, no. 4-6, pp. 39-104, May 2009.
. K. A. Cashell and N. R. Baddoo, “Ferritic stainless
steels in structural applications,” Thin-Walled
Struct., vol. 83, no. 0, pp. 169-181, Oct. 2014.
. H. R. Lashgari, D. Chu, S. Xie, H. Sun, M. Ferry,
and S. Li, “Composition dependence of the
microstructure and soft magnetic properties of Febased amorphous/nanocrystalline alloys: Areview
study,” J. Non. Cryst. Solids, vol. 391, no. 0, pp.
-82, May 2014.
. T. Ceccon, P. Belloli, and P. Ramina, “The Magnetic
Properties ofA Precipitation Hardening and Asoft
Martensitic Stainless Steel,” in Stainless Steel ’05
- Proceedings of The 5th European Congress
Stainless Steel Science and Market, pp. 185-192,
. V. B. Oliveira, M. J. R. Sandim, D. Stamopoulos,
R. A. Renzetti, A. D. Santos, and H. R. Z. Sandim,
“Annealing effects on the microstructure
and coercive field of two ferritic–martensitic
Eurofer steels: A comparative study,”
J. Nucl. Mater., vol. 435, no. 1-3, pp. 189-195,
Apr. 2013.
. P. Oxley, J. Goodell, and R. Molt, “Magnetic
properties of stainless steels at room and cryogenic
temperatures,” J. Magn. Magn. Mater., vol. 321,
no. 14, pp. 2107-2114, Jul. 2009.
. Y. Kudo, T. Sawai, S. Sakurai, K. Masaki, Y. Suzuki,
T. Sasajima, T. Hayashi, R. Takahashi, M. Honda,
S. Jitsukawa, and N. Miya, “Fabrication of 8Cr-2W
Ferritic Steel Tile for Reduction in Toroidal
Magnetic Field Ripple on JT-60U,” J. Korean Phys.
Soc., vol. 49, p. 297, 2006.
. W. Ding, L. Jiang, Y. Liao, J. Song, B. Li, and G. Wu,
“Effect of iron particle size and volume fraction on
the magnetic properties of Fe/silicate glass soft
magnetic composites,” J. Magn. Magn. Mater., vol.
, no. 0, pp. 232-238, Mar. 2015.
. B. M. Moskowitz, “Fundamental Physical
Constants and Conversion Factors,” in Global
Earth Physics,American Geophysical Union, 1995,
pp. 346-355.
. Carpenter, “Alloy Techzone: Magnetic Properties
of Stainless Steels,” Carpenter Technical Articles,
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
