PEMBUATAN POLIOL BERBASIS KOMPONEN MINYAK SAWIT SEBAGAI BAHAN BAKU BUSA POLIURETAN

Authors

  • E. Triwulandari Pusat Penelitian Kimia (P2K)-LIPI
  • N.Astrini Pusat Penelitian Kimia (P2K)-LIPI Jl. Cisitu Sangkuriang, Bandung 40135
  • A. Haryono Pusat Penelitian Kimia (P2K)-LIPI

DOI:

https://doi.org/10.17146/jsmi.2014.16.1.4332

Keywords:

Poliol, Poliuretan, Asam oleat, RBDPO, Gliserolmonooleat, 1,4-butandiolmonooleat

Abstract

PEMBUATAN POLIOL BERBASIS KOMPONEN MINYAK SAWIT SEBAGAI BAHAN BAKU BUSA POLIURETAN. Poliuretan merupakan polimer sintetik yang diperoleh dari hasil reaksi antara poliol dan isosianat. Saat ini, poliol yang digunakan untuk pembuatan poliuretan merupakan hasil dari turunan minyak bumi yang makin terbatas persediannya. Penelitian inimerupakan salah satu alternatif untuk mendapatkan bahan poliol untuk pembuatan poliuretan yang berasal dari turunan komponen minyak sawit yang terbarukan. Pada penelitian ini telah dilakukan pembuatan poliol dari turunan komponen minyak sawit berbasis asam oleat dan Refined Bleached Deodorized Palm Oil (RBDPO). Produk poliol berbasis turunan asam oleat yang telah dihasilkan diantaranya yaitu 9,10-dihidroksi asam stearat (DHAS), 9-hidroksi-10-metoksi-gliserol monostearat (HMGMS) dan 9-hidroksi-10-metoksi-butanemonostearat (HMBMS). Sedangkan poliol berbasis RBDPOyang dihasilkan yaitu poliol propane-1,2,3-triyl tris(9-hidroksi-10-metoksioktadekanoat (PTHMO). Poliol yang diperoleh kemudian direaksikan dengan isosianat untuk menghasilkan busa poliuretan. Dari beberapa poliol yang digunakan untuk pembuatan busa poliuretan, poliol HMGMS memberikan hasil yang baik.

Downloads

Download data is not yet available.

References

M. Ionescu, Chemistry and technology of polyols

for polyurethanes. iSmithers Rapra Publishing,

T. Wang, L. Zhang, D. Li, J. Yin, S. Wu, and Z. Mao,

“Mechanical properties of polyurethane foams

prepared from liquefied corn stover with PAPI”.

Bioresour. Technol., vol. 99, no. 7, pp. 2265-2268,

J. M. Cangemi,A. M. dos Santos, S. C. Neto, and G.

O. Chierice, “Biodegradation of polyurethane

derived from castor oil ”. Polímeros, vol. 18 . scielo,

pp. 201-206, 2008.

S. Dworakowska, D. Bogda, F. Zaccheria, and N.

Ravasio, “The role of catalysis in the synthesis of

polyurethane foams based on renewable raw

materials”.Catal. Today, vol. 223,pp. 148-156, 2014.

L. Ugarte,A. Saralegi, R. Fernández, L. Martín, M.

A. Corcuera, andA. Eceiza, “Flexible polyurethane

foams based on 100% renewably sourced polyols”.

Ind. Crops Prod. [doi:10.1016/

j.indcrop.2014.09.028]

H. Fan, A. Tekeei, G. J. Suppes, and F.-H. Hsieh,

“Properties of Biobased Rigid Polyurethane Foams

Reinforced with Fillers: Microspheres and

Nanoclay”. Int. J. Polym. Sci., vol. 2012, 2012.

U. Stirna, I. Sevastyanova, M. Misane, U. Cabulis,

and I. Beverte, “Structure and properties of

polyurethane foams obtained from rapeseed oil

polyols.” in Proceedings-Estonian Academy of

Sciences Chemistry, vol. 55, no. 2, 2006, p. 101.

M. Zhang, H. Pan, L. Zhang, L. Hu, and Y. Zhou,

“Study of the mechanical, thermal properties and

flame retardancy of rigid polyurethane foams

prepared from modified castor-oil-based polyols”.

Ind. Crops Prod., vol. 59, no. 0, pp. 135-143, Aug.

G. Lligadas, J. C. Ronda, M. Galia, U. Biermann, and

J. O. Metzger, “Synthesis and characterization of

polyurethanes from epoxidized methyl oleate

based polyether polyols as renewable resources”.

J. Polym. Sci. Part A Polym. Chem., vol. 44, no. 1,

pp. 634-645, 2006.

A. Zlataniæ, C. Lava, W. Zhang, and Z. S. Petroviæ,

“Effect of structure on properties of polyols and

polyurethanes based on different vegetable oils”.

J. Polym. Sci. Part B Polym. Phys., vol. 42, no. 5,

pp. 809-819, 2004.

S. Chuayjuljit, A. Maungchareon, and O. Saravari,

“Preparation and Properties of Palm Oil-Based Rigid

Polyurethane Nanocomposite Foams”. J. Reinf.

Plast. Compos., vol. 29, no. 2, pp. 218-225,

Jan. 2010.

A. A. Beltrán and L. A. Boyacá, “Production of

rigid polyurethane foams from soy-based polyols”.

Lat. Am. Appl. Res., vol. 41, no. 1, p. 75, 2011.

S. Tan, T.Abraham, D. Ference, and C. W. Macosko,

“Rigid polyurethane foams from a soybean oilbased Polyol”. Polymer (Guildf)., vol. 52, no. 13,

pp. 2840-2846, 2011.

E. Arianto, “Pertumbuhan Produksi Minyak Sawit

Indonesia 1964-2007,” WordPress.com, 2008.

[Online]. Available: http://

s tr a t eg i ka . wo r d p r e s s. c o m/ 2 00 8 /1 2 / 0 5 /

pertumbuhan-sawit-indonesia/. [Accessed:

June 2014].

A.Azlan, K. N. Prasad, H. E. Khoo, N.Abdul-Aziz,

A. Mohamad, A. Ismail, and Z. Amom,

“Comparison of fatty acids, vitamin E and

physicochemical properties of Canarium

odontophyllum Miq. (dabai), olive and palm oils”.

J. Food Compos. Anal., vol. 23, no. 8, pp. 772-776,

Dec. 2010.

Downloads

Published

31-10-2014

How to Cite

E. Triwulandari, N.Astrini, & A. Haryono. (2014). PEMBUATAN POLIOL BERBASIS KOMPONEN MINYAK SAWIT SEBAGAI BAHAN BAKU BUSA POLIURETAN. Jurnal Sains Materi Indonesia, 16(1), 43–48. https://doi.org/10.17146/jsmi.2014.16.1.4332