ANODISASI PADUAN AL 2024 T3 DENGAN METODE PULSE CURRENT DALAM LARUTAN ASAM TARTARAT-SULFAT (TSA) [A Preliminary Study of Corrosion for Ni3(Si,Ti) Intermetallic Compound With Various Temperatures in Neutral Sodium Chloride Solution]

Article Sidebar

PDF
Published: Dec 7, 2015
DOI: https://doi.org/10.14203/metalurgi.v30i3.43
Keywords:
Korosi batas butir, Paduan intermetalik, Kurva polarisasi, Uji rendam, Sodium klorida, Intergranular corrosion, Intermetallic compound, Polarization curve, Immersion test, Sodium chloride

Main Article Content

M. Zaki Mubarok
a Staf pengajar dan alumnus Program Studi Teknik Metalurgi, FTTM-ITB
Soleh Wahyudi
PT. Rekayasa Plating, Pondok Rancabelut
Fitrian Odang
a Staf pengajar dan alumnus Program Studi Teknik Metalurgi, FTTM-ITB
Sutarno Suharto
Mahasiswa Program Doktor, Program Magister dan Doktor Rekayasa Pertambangan, FTTM-ITB

Abstract

The intermetallic compound of Ni3(Si,Ti) containing L12 single phase, have been applied as a candidate for high temperature material. This prelimenary study have been investigated using immersion test and polarization test in neutral 0.5 M NaCl solution at ambient temperature,of 40 °C and 60 °C, where the morfology of the corroded spesimens were observed by scanning electron microscope. The susceptibility of intergranular corrosion for this compound increases with increasing the temperature of solutions. The increase of temperature contributes for the diffulty of stable film formation with decreasing passive regions. The corrosion resistance of the compound decreased with increasing temperature test. It is implies that intergranular attack of the compound took place due to the presence of boron in grain boundaries.

Article Details

How to Cite
Mubarok, M. Z., Wahyudi, S., Odang, F., & Suharto, S. (2015). ANODISASI PADUAN AL 2024 T3 DENGAN METODE PULSE CURRENT DALAM LARUTAN ASAM TARTARAT-SULFAT (TSA) [A Preliminary Study of Corrosion for Ni3(Si,Ti) Intermetallic Compound With Various Temperatures in Neutral Sodium Chloride Solution]. Jurnal Metalurgi, 30(3), 161–170. https://doi.org/10.14203/metalurgi.v30i3.43
Issue
Vol. 30 No. 3 (2015): Metalurgi
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

Callister, W.D., Retwisch, D.G., 2011. Material Science and Engineering, 8th Edition, John Wiley & Sons, New York, p. 408-409.

Rubio, G. et.al., 2009. Influence of Molybdate Species on the Tartaric Acid/Sulphuric Acid Anodic Films Grown on AA2024 T3 Aerospace Alloy, Corrosion Science, Vol. 51, pp. 2034-2042.

Gazapo, L. and Gea, J., 1994. Anodizing of Aluminium, TALAT Lecture 520.

Pébère, B.G. et.al. 2008. FESEM and EIS Study of Sealed AA2024 T3 Anodized in Sulfuric Acid Electrolytes: Influence of Tartaric Acid, Journal of The Electrochemical Society (JES), Vol. 155.

Augros, M. and Viola, A., 2013. Environmentally Friendly Aluminum Anodizing Processes for Aerospace Application: A Comparative Study, Messier-Bugatti, Molsheim, France, pp. 1-4.

Takahashi, H., 2003. Aluminum Anodizing, Corrosion: Fundamentals, Testing, and Protection, ASM Handbook, ASM International, Vol 13A, p. 736–740.

Mirzaei, M. and Bahrololoom, M.E., 2014. Influence of Pulse Currents on the Nanostructure and Color Absorption Ability of Colored Anodized Aluminum, Vacuum, Vol. 99, pp. 277-283.

Juhl, D.A., 2006. A New Approach to Pulse Anodising - Decreasing Energy Consumption – Increasing Productivity, AAC, Atlanta.

Society of Automotive Engineers (SAE), 2008. Metals and Alloys in the Unified Numbering System, SAE International and ASTM.

Qin, Z.N and Xue, J.X., 2007. Effects of Anodizing Condition on Anodic Alumina Structure. Springer Science Journal Vol. 42, pp. 3878-3882.

Aerts, T., Iris, D.G., Terryn, H., 2008. Study of Initiation and Development of Local Burning Phenomena During Anodizing of Aluminium Under Controlled Convection, Electrochemica Acta, Vol. 54, pp. 270-279.