DOI: https://doi.org/10.55981/metalurgi.v30i3

Published: 2024-09-10

Articles

PROSES PENGAMBILAN UNSUR MANGAN DAN BESI DARI HASIL SAMPING PENGOLAHAN BIJIH MANGAN TASIKMALAYA[Extraction of Manganese and Iron From Waste Treatment of Tasikmalaya Manganese Ore]

Ariyo Suharyanto, Eko Sulistiyono

95-104

PDF

PENGARUH PENCAMPURAN DAN RASIO PREKURSOR/DOPAN DALAM PEMBUATAN LAPISAN TIPIS FLUORINE DOPED TIN OXIDE (FTO) BERBASIS TIMAH (II) KLORIDA[The Effect of Mixing Condition and Dopant/Precursor Ratio in Fabrication of Fluorine Doped Tin Oxide (FTO) Thin Film Based on Tin (II) Chloride]

Latifa Hanum Lalasari

105-114

PDF

STUDI PERILAKU PELINDIAN BIJIH NIKEL LIMONIT DARI PULAU HALMAHERA DALAM LARUTAN ASAM NITRAT [Study on the Leaching Behaviour of Limonite Nickel Ore From Halmahera Island in Nitric Acid Solution]

Mohammad Wildanil Fathoni, Mohammad Zaki Mubarok

115-124

PDF

PENGARUH UKURAN BUTIRAN TERHADAP STRUKTUR KRISTAL PADA PROSES KALSINASI PARSIAL DOLOMIT [Effect of Particles Size to Crystal Structure in Partial Calcination Process of Dolomite]

Eko Sulistiyono

125-132

PDF

Pengaruh Mo dan Ni terhadap Struktur Mikro dan Kekerasan Baja Tahan Karat Martensitik 13Cr [The Effect of Mo And Ni on The Microstructure and Mechanical Properties of 13Cr Martensitic Stainless Steels]

Efendi Mabruri

133-140

PDF

PENGARUH THERMOMECHANICAL CONTROLLED PROCESSED (TMCP) TERHADAP PENGHALUSAN BUTIR DAN SIFAT MEKANIK PADUAN Cu-Zn 70/30[Influence of Thermomechanical Controlled Process on the Grain Size and Mechanical Properties of Cu-Zn 70/30]

Eka Febriyanti

141-148

PDF

KETAHANAN AUS ABRASIF DARI BEBERAPA JENIS MODIFIKASI 13Cr BAJA TAHAN KARAT MARTENSITIK [The Wear Abrasion Resistant of Modifications of 13Cr Martensitic Stainless Steel]

Moch. Syaiful Anwar

149-154

PDF

ANODISASI PADUAN AL 2024 T3 DENGAN METODE PULSE CURRENT DALAM LARUTAN ASAM TARTARAT-SULFAT (TSA) [A Preliminary Study of Corrosion for Ni3(Si,Ti) Intermetallic Compound With Various Temperatures in Neutral Sodium Chloride Solution]

M. Zaki Mubarok, Soleh Wahyudi, Fitrian Odang, Sutarno Suharto

161-170

PDF