Numerical Simulation Analysis of Injector Placement for Optimum Fuel/Air Mixture in Mini Turbojet Combustion Chamber with 200N Static Thrust

Authors

  • Vicky Wuwung Politeknik Negeri Bandung
  • Aura Saum Mulyadi
  • Reina Fadjrin Nurul Anissa
  • Wenty Anggraeni
  • Radi Suradi Kartanegara

DOI:

https://doi.org/10.55981/ijoa.2026.13060

Keywords:

Mini turbojet combustion chamber, numerical simulation, combustion efficiency, injector optimization, steady flow.

Abstract

A turbojet engine is a simple jet engine. Small turbojets utilize gas turbines to generate hot gas, which is then directed to the nozzle at a higher temperature. The development of mini turbojets at Polban began with the creation of combustion chamber geometry and the determination of the number and location of injectors for efficient combustion. The process of mixing fuel and air, as well as combustion within the combustion chamber of the mini turbojet with a thrust of 200 N, was analysed numerically in this study. This study employed a Computational Fluid Dynamics (CFD) approach based on the k-epsilon turbulence model to optimize the design of the annular combustion chamber with 154 air holes and 11 fuel injectors. Additionally, simulations of mixing and combustion within the combustion chamber were conducted as a form of validation. Based on the simulation results, changes in injector position caused an increase in the recirculation zone, which initially involved one injector out of eight, to eight out of eleven injectors, helping to maintain combustion stability and achieve thermal efficiency of 78.29%. With a temperature ratio (TR) of 3.064 and a pressure ratio (PR) of 0.39, the ideal airflow distribution produces toroidal vortices in the primary and secondary zones. With recommendations for further optimization to enhance performance under various operating conditions, these findings provide useful guidance for the development of a more stable and efficient mini-turbojet combustion chamber.

References

Abubakar, Z., & Mokheimer, E. M. A. (2020). Thermoacoustic combustion instability of propane-oxy-combustion with CO2 dilution: Experimental analysis. International Journal of Energy Research, 44(2), 1031–1045. https://doi.org/10.1002/er.4980

Anggraeni, W. (2022). Perancangan Injektor Ruang Bakar Mini Turbojet Engine Dengan Thrust Statik 200 N, Laporan Tugas Akhir, Politeknik Negeri Bandung.

Anissa, R. F. N. (2023). Analisis Dan Modifikasi Penempatan Injektor Pada Ruang Bakar Mini Turbojet Engine Dengan Gaya Dorong Statik 200 N. Laporan Tugas Akhir, Politeknik Negeri Bandung.

Capata, R., & Achille, M. (2018). Design and optimization of fuel injection of a 50 kw micro turbogas. Designs, 2(2), 1–22. https://doi.org/10.3390/designs2020014

Chmielewski, M., Fulara, S., & Gieras, M. (2016). Theoretical Studies of Variable Geometry – Hot Section of the Miniature Jet Engine. Journal of KONES. Powertrain and Transport, 23(2), 69–80. https://doi.org/10.5604/12314005.1213559

Elhaj Mohammed, R. S. (2019). Design and Analysis of Annular Combustion Chamber for a Micro Turbojet Engine. International Journal of Aerospace and Mechanical Engineering, International Scholarly and Scientific Research & Innovation, 13(4), 282–287.

Fuchs, F., Meidinger, V., Neuburger, N., Reiter, T., Zündel, M., & Hupfer, A. (2019). Challenges in designing very small jet engines - fuel distribution and atomization. Open Archives of the 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, 1–8.

Gieras, M., & Stankowski, T. (2012). Computational study of an aerodynamic flow through a micro-turbine engine combustor. Journal of Power and Technologies, 92(2), 68–79.

Gorgulu, Y. F., Sahin, B., Ekici, S., & Karakoc, T. H. (2025). Altitude-Dependent Analysis of Combustion Performance and Emissions in a Commercial Aircraft Engine Leveraging Real Engine Data. International Journal of Aeronautical and Space Sciences, June. https://doi.org/10.1007/s42405-025-00982-y

H.I.H. Saravanamuttoo, H. Cohen, G. F. C. R., & A.C. Nix, P. V. S. (2017). Gas Turbine Theory SEVENTH EDITION Gas Turbine Theory.

He, W., Guo, Z., Xu, S., & Jin, Y. (2021). Numerical and Experimental Investigations on Performance Optimization of a Microturbojet Engine Combustor. International Journal of Aerospace Engineering, 2021. https://doi.org/10.1155/2021/6616537

PRISACARIU, V., & CÎRCIU, I. (2016). Considerations Regarding the Performance of Combustion Chambers for Turbo-Jet Engines. Review of the Air Force Academy, 14(2), 53–60. https://doi.org/10.19062/1842-9238.2016.14.2.7

Santoso, R. R., Wuwung, V., Fadjrin, R., Annisa, N., & Kartanegara, R. S. (2023). Design of Mini Turbojet Engine Combustion Chamber Liner With 200N Static Thrust. Santoso et Al.) Indonesian Journal of Aerospace, 21(2), 65–82. https://doi.org/10.55981/ijoa.2023.38

Syarifudin, A., & Bramantya, M. A. (2022). Simulasi Numerik Pengaruh Jumlah Fuel Injector dan Dimensi Lubang Liner Ruang Bakar Turbojet 200 N. Journal of Mechanical Design and Testing, 4(1), 32. https://doi.org/10.22146/jmdt.63201

Topal, A., Turan, O., & Uslu, S. (2015). Design, Manufacturing and Rig Test of a Small Turbojet Engine Combustor with Airblast Atomizer. International Journal of Materials, Mechanics and Manufacturing, 3(2), 97–100. https://doi.org/10.7763/ijmmm.2015.v3.174

Wu, Y., Al-Rahbi, I. S., Lu, Y., & Kalghatgi, G. T. (2007). The stability of turbulent hydrogen jet flames with carbon dioxide and propane addition. Fuel, 86(12–13), 1840–1848. https://doi.org/10.1016/j.fuel.2006.11.032

Zhang, Z., Zhao, D., Ni, S., Sun, Y., Wang, B., Chen, Y., Li, G., & Li, S. (2019). Experimental characterizing combustion emissions and thermodynamic properties of a thermoacoustic swirl combustor. Applied Energy, 235(October 2018), 463–472. https://doi.org/10.1016/j.apenergy.2018.10.130

Z. P. Tan. (2017) “Experimental Study of Spray-Formation Processes in Twin-FluidJet-In-Crossflow At Jet-Engine Operating Conditions”, Ph.D Thesis, Georgia Institute of Technology.

Downloads

Published

09-11-2026

How to Cite

Wuwung, V., Aura Saum Mulyadi, Reina Fadjrin Nurul Anissa, Wenty Anggraeni, & Radi Suradi Kartanegara. (2026). Numerical Simulation Analysis of Injector Placement for Optimum Fuel/Air Mixture in Mini Turbojet Combustion Chamber with 200N Static Thrust. Indonesian Journal of Aerospace, 24(1), 17–34. https://doi.org/10.55981/ijoa.2026.13060

Similar Articles

<< < 6 7 8 9 10 11 12 > >> 

You may also start an advanced similarity search for this article.