Evaluation of Adhesive Joint Performance in Aluminum Single-Lap Joints Using Experiments and FEA.

Authors

  • Rezky Agung Pratomo Universitas Indonesia
  • Kosim Abdurohman National Research and Innovation Agency
  • Riki Ardiansyah National Research and Innovation Agency
  • Afid Nugroho National Research and Innovation Agency
  • Fajar Ari Wandono
  • Awang Rahmadi Nuranto National Research and Innovation Agency
  • Mochamad Chalid Universitas Indonesia

DOI:

https://doi.org/10.55981/ijoa.2026.15829

Keywords:

Adhesive, Single Lap Joint, Tensile Test, Finite Element Analysis, Viscosity

Abstract

In order to assess adhesive performance, this work employed numerical simulations, single lap joint (SLJ) testing, and material characterization. Three different types of glue were analyzed for their mechanical behavior and joint performance. ASTM D638 was first used to evaluate the general adhesive qualities’ elastic modulus, strength, and ductility. In accordance with ASTM D5868, tensile testing was employed to evaluate the bonded SLJ’s structural performance. Finally, a simplified finite element analysis (FEA) model based on springs was developed to investigate stress distribution in more detail. The results showed significant variations in the mechanical response: high-modulus adhesives demonstrated better stiffness but lower strain capacity, while more ductile adhesives demonstrated lower strength. These experimental results demonstrate that the adhesive selection significantly affects the shear strength, deformation behavior, and failure mechanism of the overlap joint. The strongest junction was created by the adhesive with the highest modulus of elasticity; adhesives with lower moduli had a larger capacity for deformation but less strength. In accordance with conventional joint theory, modeling findings showed that shear stress was concentrated at the borders of the overlap area and decreased toward the center. Examining theoretical, experimental, and numerical findings reveals good agreement; the differences between the theoretical predictions and the simulation and experimental results are 5.59% and 1.51%, respectively. In summary, this study highlights the relationship between adhesive properties and joint performance and shows how simplified numerical models may precisely forecast the mechanical behavior and stress distribution in adhesive-bonded SLJ joints.

Author Biographies

Kosim Abdurohman , National Research and Innovation Agency

Kosim Abdurohman is a researcher in the field of materials engineering, with a focus on adhesive bonding and composite materials. He is currently affiliated with National Research and Innovation Agency. His research interests include the mechanical behavior of adhesive joints, surface treatment methods, and the durability of bonded structures under environmental exposure.

Riki Ardiansyah, National Research and Innovation Agency

Riki Ardiansyah is a researcher affiliated with the National Research and Innovation Agency (BRIN), Indonesia. His work focuses on applied research and scientific studies contributing to national research development. His research interests include data analysis, scientific modeling, and interdisciplinary approaches to support innovation and technological advancement. He has been involved in various research activities aimed at enhancing the quality and impact of research outputs in Indonesia.

Afid Nugroho, National Research and Innovation Agency

Afid Nugroho is a researcher in the field of aerospace and materials engineering, with a focus on aircraft structures and manufacturing technologies. His work includes studies on the structural analysis of UAV components, such as landing gear systems, as well as the development of aerospace parts using advanced manufacturing methods like 3D printing. His research interests also extend to composite materials and structural performance in aerospace applications.

Fajar Ari Wandono

Fajar Ari Wandono is a researcher at the National Research and Innovation Agency (BRIN), Indonesia, specializing in aerostructure analysis and numerical simulation. His research focuses on the application of the finite element method (FEM) for structural analysis and performance evaluation of aerospace components. His work involves modeling, simulation, and validation of structural behavior to support the development of reliable and efficient aerospace systems.

Awang Rahmadi Nuranto, National Research and Innovation Agency

Awang Rahmadi is a researcher at the National Research and Innovation Agency (BRIN), Indonesia, specializing in aerostructure analysis and numerical simulation. His research focuses on the application of the finite element method (FEM) to analyze structural behavior and performance of aerospace components. His work involves computational modeling and simulation to support the design and optimization of efficient and reliable aerostructures.

Mochamad Chalid, Universitas Indonesia

Mochamad Chalid is a Professor at the Department of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, Indonesia. His research expertise lies in polymer engineering, composite materials, and advanced material processing. He has extensive experience in the development and characterization of polymer-based materials for engineering applications. His research interests include composite structures, material durability, and the application of advanced materials in various industrial sectors.

References

Abdurohman, K., Pratomo, R. A., Hidayat, R., Ramadhan, R. A., Nurtiasto, T. S., Ardiansyah, R., … Wandono, F. A. (2024). Influence of Abrasion Treatments on Performance of Adhesively Bonded Glass/Vinyl Ester Single Lap Joints. Evergreen, 11(2), 806–820. https://doi.org/10.5109/7183361

Akpinar, S., Doru, M. O., Özel, A., Aydin, M. D., & Jahanpasand, H. G. (2013). The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment. Composites Part B: Engineering, 55, 55–64. https://doi.org/10.1016/j.compositesb.2013.05.056

Andarabi, A. A., Shelesh-Nezhad, K., & Chakherlou, T. N. (2022). The effect of laser surface structuring patterns on the interfacial resistance of aluminum joints bonded with epoxy adhesive. International Journal of Adhesion and Adhesives, 114. https://doi.org/10.1016/j.ijadhadh.2022.103101

ASTM International. (2014). Standard Test Method for Tensile Properties of Plastics (ASTM D638-14). West Conshohocken, PA: ASTM International. https://doi.org/10.1520/D0638-14

Boutar, Y., Naïmi, S., Mezlini, S., & Ali, M. B. S. (2016). Effect of surface treatment on the shear strength of aluminium adhesive single-lap joints for automotive applications. International Journal of Adhesion and Adhesives, 67, 38–43. https://doi.org/10.1016/j.ijadhadh.2015.12.023

Cui, X., Tian, L., Wang, D. S., & Dong, J. P. (2021). Summary of thermosetting composite material welding. Journal of Physics: Conference Series, 1765(1). IOP Publishing Ltd. https://doi.org/10.1088/1742-6596/1765/1/012021

Dachev, D., Kazilas, M., Alfano, G., & Omairey, S. (2025, June 1). Towards Reliable Adhesive Bonding: A Comprehensive Review of Mechanisms, Defects, and Design Considerations. Materials, Vol. 18. Multidisciplinary Digital Publishing Institute (MDPI). https://doi.org/10.3390/ma18122724

Demiral, M. (2025). Strength in Adhesion: A Multi-Mechanics Review Covering Tensile, Shear, Fracture, Fatigue, Creep, and Impact Behavior of Polymer Bonding in Composites. Polymers, 17(19), 2600. https://doi.org/10.3390/polym17192600

Guo, C., Chen, Y., Zhang, H., Ji, H. P., Wu, Z., Liu, X., & Nagaumi, H. (2023). Synchronous improvement of mechanical properties and corrosion resistance of novel heat-treatable 5xxx aluminum alloy by non-isothermal ageing. Journal of Alloys and Compounds, 939. https://doi.org/10.1016/j.jallcom.2023.168770

Guo, L., Liu, J., Xia, H., Li, X., Zhang, X., & Yang, H. (2021). Effects of surface treatment and adhesive thickness on the shear strength of precision bonded joints. Polymer Testing, 94. https://doi.org/10.1016/j.polymertesting.2021.107063

Hecht, M., Fass, M., & Baumgartner, J. (2023). Fatigue strength of adhesively bonded deep drawn sheet specimens under multiaxial loading with variable amplitudes. Procedia Structural Integrity, 57, 581–588. Elsevier B.V. https://doi.org/10.1016/j.prostr.2024.03.064

Maggiore, S., Banea, M. D., Stagnaro, P., & Luciano, G. (2021). A Review of Structural Adhesive Joints in Hybrid Joining Processes. Polymers, 13(22). https://doi.org/10.3390/polym13223961

Marchione, F. (2020). Investigation of vibration modes of double-lap adhesive joints: Effect of slot. International Journal of Engineering, Transactions A: Basics, 33(10), 1917–1923. https://doi.org/10.5829/IJE.2020.33.10A.10

Marchione, F. (2023). Shear Stress Distribution in Double-lap Adhesive Joints Reinforced with Nylon Fabric: Numerical Investigation. International Journal of Engineering, Transactions A: Basics, 36(1), 35–40. https://doi.org/10.5829/ije.2023.36.01a.05

Miturska-Barańska, I., & Rudawska, A. (2022). Influence of Adhesive Compound Viscosity on the Strength Properties of 1.0503 Steel Sheets Adhesive Joints. Advances in Science and Technology Research Journal, 16(2), 196–205. https://doi.org/10.12913/22998624/147314

Moazzami, M., Akhavan-Safar, A., Ayatollahi, M. R., Poulis, J. A., da Silva, L. F. M., & Teixeira De Freitas, S. (2023). A degradable mode I cohesive zone model developed for damage and fracture analysis of dissimilar composite/metal adhesive joints subjected to cyclic ageing conditions. Theoretical and Applied Fracture Mechanics, 127. https://doi.org/10.1016/j.tafmec.2023.104076

Paz, E., Narbón, J. J., Abenojar, J., Cledera, M., & del Real, J. C. (2016, November 1). Influence of Acrylic Adhesive Viscosity and Surface Roughness on the Properties of Adhesive Joint. Journal of Adhesion, Vol. 92, pp. 877–891. Taylor and Francis Inc. https://doi.org/10.1080/00218464.2015.1051221

Rahul, B., Suresh, C., Narendran, E., & Haribaskar, R. (2023). Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load. Journal of Polymer & Composite, (13). https://doi.org/10.37591/JoPC

Ramaswamy, K., O’Higgins, R. M., Kadiyala, A. K., McCarthy, M. A., & McCarthy, C. T. (2020). Evaluation of grit-blasting as a pre-treatment for carbon-fibre thermoplastic composite to aluminium bonded joints tested at static and dynamic loading rates. Composites Part B: Engineering, 185. https://doi.org/10.1016/j.compositesb.2020.107765

Tahmasebi, F. (2002). Automation Tools for Finite Element Analysis of Adhesively Bonded Joints. JSME/ASME International Conference on Materials and Processing. Honolulu, USA: The Japan Society of Mechanical Engineers.

Teixeira de Freitas, S., & Sinke, J. (2015). Failure analysis of adhesively-bonded skin-to-stiffener joints: Metal-metal vs. composite-metal. Engineering Failure Analysis, 56, 2–13. https://doi.org/10.1016/j.engfailanal.2015.05.023

Vinay, M. N. (2021). Optimization of adhesive bonding parameters of aluminium 6082 joints. AIP Conference Proceedings, 2317. American Institute of Physics Inc. https://doi.org/10.1063/5.0036127

Wei, Y., Jin, X., Luo, Q., Li, Q., & Sun, G. (2024). Adhesively bonded joints – A review on design, manufacturing, experiments, modeling and challenges. Composites Part B: Engineering, 276. https://doi.org/10.1016/j.compositesb.2024.111225

Wu, Y., Lin, J., Carlson, B. E., Lu, P., Balogh, M. P., Irish, N. P., & Mei, Y. (2016). Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys. Surface and Coatings Technology, 304, 340–347. https://doi.org/10.1016/j.surfcoat.2016.04.051

Zhang, D., & Huang, Y. (2021). Influence of surface roughness and bondline thickness on the bonding performance of epoxy adhesive joints on mild steel substrates. Progress in Organic Coatings, 153. https://doi.org/10.1016/j.porgcoat.2021.106135

Zhang, R., Li, J., Li, Q., Qi, Y., Zeng, Z., Qiu, Y., … Birbilis, N. (2019). Analysing the degree of sensitisation in 5xxx series aluminium alloys using artificial neural networks: A tool for alloy design. Corrosion Science, 150, 268–278. https://doi.org/10.1016/j.corsci.2019.02.003

Downloads

Published

26-10-2026

How to Cite

Pratomo, R. A., Abdurohman , K., Ardiansyah, R., Nugroho, A., Wandono, F. A., Nuranto, A. R., & Chalid, M. (2026). Evaluation of Adhesive Joint Performance in Aluminum Single-Lap Joints Using Experiments and FEA. Indonesian Journal of Aerospace, 24(1), 1–16. https://doi.org/10.55981/ijoa.2026.15829

Most read articles by the same author(s)

Similar Articles

<< < 11 12 13 14 15 16 17 > >> 

You may also start an advanced similarity search for this article.