Ahmad Alsahlani and Thurai Rahulan, 2017, Composite Structural Analysis of a High Altitude, Solar  Powered Unmanned Aerial Vehicle, International Journal of Mechanical Engineering and Robotics  Research Vol. 6, No. 1, January 2017 Atik Bintoro, 2016, Lend

Aryandi Marta; Atik Bintoro

doi:10.30536/j.jtd.2018.v16.a2962

Ahmad Alsahlani and Thurai Rahulan, 2017, Composite Structural Analysis of a High Altitude, Solar Powered Unmanned Aerial Vehicle, International Journal of Mechanical Engineering and Robotics Research Vol. 6, No. 1, January 2017 Atik Bintoro, 2016, Lend

Authors

Aryandi Marta Pusat Teknologi Penerbangan Lembaga Penerbangan dan Antariksa Nasional (LAPAN)
Atik Bintoro Pusat Teknologi Penerbangan Lembaga Penerbangan dan Antariksa Nasional (LAPAN)

DOI:

https://doi.org/10.30536/j.jtd.2018.v16.a2962

Keywords:

MUS-01, LSU-03NG, characteristic, MTOW

Abstract

The characteristic model of MUS-01 wing structure testing has been performed. Planned, this model will be used as an unmanned wing of the LSU-03NG. The test model is made of composite type e-glass. At the time of testing the structure test model is loaded according to MTOW weight. This research method also involves the unmanned aircraft mission, especially on the model test structure, model dimension, and direct experiment in the form of loading on the test model. The result of characterization of the test model during test, showed that the indicated test model has the characteristics as a test model that is unable to accept the unmanned operational load of LSU-03NG series aircraft. So it can not be used as a consideration for the structure of the unmanned aircraft.

References

Ahmad Alsahlani and Thurai Rahulan, 2017, Composite Structural Analysis of a High Altitude, Solar

Powered Unmanned Aerial Vehicle, International Journal of Mechanical Engineering and Robotics

Research Vol. 6, No. 1, January 2017

Atik Bintoro, 2016, Lendutan Struktur Twin Boom Pesawat Nir Awak LSU-05 Pada Saat Menerima

Beban Terbang, Jurnal Teknologi Dirgantara, Vol. 14 No. 2 Desember 2016

Atik Bintoro, 2017, Laporan Tahun 2016 Pelaksanaan Program Litbangyasa Pustekbang 2016: Kajian

Sertifikasi LSU, Pengembangan Laboratorium Pustekbang Dan Missi LSU-03, Pusat Teknologi

Penerbangan, LAPAN, Bogor

Fajar Ari Wandono, Riki Ardiansyah, Dony Hidayat, 2015, Evaluasi Kriteria Kegagalan Tsai-Hill Pada

Struktur Rangka Main Landing Gear LSU-05, Buku Bunga Rampai Teknologi Pesawat Terbang sebagai

Mitra Pengembang Teknologi Roket dan Satelit Nasional, Indonesia Book Project (IBP), Jakarta.

Kosim Abdurohman, Aryandi Marta, 2017, Tensile Properties Komposit Serat e-Glass, Hasil Vacuum

Infussion sebagai Material Struktur LSU (Lapan Surveillance UAV), Prosiding Siptekgan XXI-2017,

Pustekbang, LAPAN, Bogor

Lidia Kristina Panjaitan, Ani Nurwasilah, 2015, Penelitian Resin Epoxy Content dan Ketebalan Material

Komposit LSU-05 dengan Metode Hand Lay-up & Vacum Bagging, Buku Bunga Rampai Teknologi

Pesawat Terbang sebagai Mitra Pengembang Teknologi Roket dan Satelit Nasional, Indonesia Book

Project (IBP), Jakarta.

Michele Castellani, Jonathan E. Cooper, and Yves Lemmens, 2016, Flight Loads Prediction of High

Aspect Ratio Wing Aircraft Using Multibody Dynamics, International Journal of Aerospace Engineering,

Volume 2016 (2016), Article ID 4805817, 13 pages

Nitesh Gupta, M.J. Augustin, Sakthi Sathya, Saransh Jain, S.R. Viswamurthy, Kotresh M. Gaddikeri and

Ramesh Sundaram, 2013, Structural Health Monitoring of Composite Aircraft Structures Using Fiber

Bragg Grating Sensors, Journal of the Indian Institute of Science VOL 93:4 Oct.–Dec. 2013

Riki Ardiansyah, Nanda Wirawan, 2016, Perhitungan Letak dan Pergeseran Pusat Gravitasi Pesawat

LSU-03 untuk menentukan Posisi Beban dan Pemberat, Prosiding Siptekgan XX-2016, Pustekbang,

LAPAN, Bogor

Rizky Fitriansyah, Fajar Ari Wandono, Atik Bintoro, Analisis Kekuatan Struktur Sayap LSU-03NG dengan

Menggunakan Metode Elemen Hingga, Prosiding Siptekgan 2017, ISBN : 978-602-71833-3-9, Pusat

Teknologi Penerbangan, Lembaga Penerbangan Dan Antariksa Nasional

Santhosh N, N D Shivakumar, Chetan D M, Pooja Kumari, Sahana B C, Mahalya R, 2014, Design And

Analysis Of Engine Mounting Frame Of An Unmanned Aerial Vehichle, International Journal of

Research In Aeronautical And Mechanical Engineering, Vol.2 Issue.5, May 2014

Shreyas Krishnamurthy, Suraj Jayashankar, Sharath V Rao, Rochen Krishna T S, Shankargoud

Nyamannavar, 2014, Cfd Analysis Of An Rc Aircraft Wing, International Journal Of Mechanical And

Production Engineering, Issn: 2320-2092, Volume- 2, Issue-9, Sept.-2014

Yuvaraj G and Veeranjaneyulu K, 2016, Buoyancy Lift Augmentation, Journal of Aeronautics &

Aerospace Engineering, DOI: 10.4172/2168-9792.1000175, Volume 5, Issue 4 • 1000175, ISSN: 2168-

9792

Downloads

Published

25-04-2019

How to Cite

Marta, A., & Bintoro, A. (2019). Ahmad Alsahlani and Thurai Rahulan, 2017, Composite Structural Analysis of a High Altitude, Solar Powered Unmanned Aerial Vehicle, International Journal of Mechanical Engineering and Robotics Research Vol. 6, No. 1, January 2017 Atik Bintoro, 2016, Lend. Indonesian Journal of Aerospace, 16(2 Desember), 93–100. https://doi.org/10.30536/j.jtd.2018.v16.a2962