PENYEMPURNAAN TEKNIK PENYADAPAN RESIN PINUS DENGAN METODE KUAKAN
Main Article Content
Abstract
Overtapping of pine resin in terms of quare size which is too wide and deep and the use of anorganic stimulant may cause tree damage and increase the risk of tree to fall. Modification of tapping technique may reduce the damage of trees and increase the production of pine resin. The modification should consider several aspects of economical, ecological, social, and technical. The objectives of the research were to determine the width and number of quare on each tree, the appropriate type of organic stimulant, and also cost analysis of the modified tapping technique. The results showed that different type of tapping such as width and number of quare per tree significantly gave different resin production. However, different types of organic stimulant and its interaction with number and width of quare was not correlated significantly with resin production. Modification of tapping techniques and the use of organic stimulant had direct influences on the cost and profit.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Atmosuseno B.S., & Duljapar K. (1996). Kayu komersil. Jakarta: Penebar Swadaya.
Cahyono S.A., Prakosa D., Yuliantoro D., & Siswo. (2011). Produksi resin tusam pada berbagai ukuran dan jumlah kowakan. Buletin Hasil Hutan, 17(2),136–141.
Darmastuti I.N. (2011). Pengaruh penggunaan stimulansia organik dan zat pengatur tumbuh (ZPT) terhadap produktivitas penyadapan resin pinus di Hutan Pendidikan Gunung Walat. (Skripsi Sarjana). Institut Pertanian Bogor, Bogor.
Dulsalam, M.M., Idris, & Tinambunan D. (1998). Produksi dan biaya penyadapan resin tusam dengan sistem bor: Studi kasus di PT
Inhutani IV Sumatera Barat. Buletin Penelitian Hasil Hutan, 16(1), 1–16.
Kozlowzki T.T., & Pallardy S.G. (1997). Physiology of woody plants. US: Academic Press.
Lekha, C. & Sharma, K.R. (2013). Tapping of Pinus roxburghii (Chir Pine) for oleoresin in Himachal Pradesh, India. Advances in Forestry Letter, 2(3), 51–55.
Lukman. (1995). Pengaruh penggunaan bahan penutup stimulan yang dikombinasikan dengan sistem sadap HLE terhadap produksi karet. Jurnal Penelitian Karet, 13(1), 11–20.
Martawijaya A., Kartasujana, I., Kadir K., & Prawira S.A. (2005). Atlas kayu Indonesia Jilid II. Bogor: Badan Penelitian dan Pengembang-an Kehutanan. Departemen Kehutanan.
Matangaran J.R. (2006). Catatan untuk penyadap resin pinus. Duta Rimba, 1(8), 22–23.
Matangaran J.R., Santosa G., & Aziz F. (2012). Peningkatan produktivitas resin pinus melalui penggunaan stimulansia cairan jeruk nipis dan lengkuas. Jurnal Ilmu Teknologi Hasil Hutan, 5(1), 29–31.
Pandit I.K.N., & Ramdan H. (2002). Anatomi kayu: pengantar sifat kayu sebagai bahan baku. Bogor: Fakultas Kehutanan IPB.
Pandit I.K.N., & Kurniawan D. (2008). Struktur kayu: Sifat kayu sebagai bahan baku dan ciri diagnostik kayu perdagangan Indonesia. Bogor: Fakultas Kehutanan IPB.
Perhutani. (2011). Gondorukem jadi bisnis yang menjanjikan. http://perumperhutani. com/2011/10. Diakses 1 April 2014.
Purnawati R.R. (2014). Produktivitas penyadapan resin pinus dengan metode bor tanpa pipa [Skripsi Sarjana]. Institut Pertanian Bogor, Bogor.
Sukadaryati. (2014). Pemanenan resin pinus menggunakan tiga cara penyadapan. Jurnal Penelitian Hasil Hutan, 32(1), 62–70.
Sukarno A., Hardiyanto E.B., Marsoem S.N., & Naiem M. (2013). Hubungan perbedaan ukuran mata bor terhadap produksi resin Pinus merkusii Jungh et de Vriese. Journal PAL, 4(1), 38–42.
Sumarmadji, Tistama R., & Siswanto. (2004). Protein-protein spesifik yang diinduksi oleh tanaman karet. Jurnal Penelitian Karet, 22(2), 57–69.
Wattimena G.A. (1988). Zat pengatur tumbuh tanaman. Bogor: IPB Press.
