STABILISASI DIMENSI KAYU JATI CEPAT TUMBUH DAN JABON DENGAN PERLAKUAN PEMADATAN SECARA KIMIA
Main Article Content
Abstract
In general, wood from plantation forests are dimensionally unstable, therefore, timber use are limited. T s his paper observes dimensional stability of chemically densified fast-growing teak (JCT) and jabon woods. JCT and jabon woods were impregnated using a mixture of old teak sawdust extracts and resin. The resin used were vinyl acrylic and polyvinyl acetate in three concentrations : 8, 10, and 12% (w/ v), and two compositions of resorcinol resin. Results show that in general, dimensions of the impregnated wood are more stable than non-impregnated wood. Wood impregnated with the mixture of teak extract solution and resorcinol resin shows better dimentional stability than other resins.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Basri, E., Balfas, J., Dewi, L.M., Jasni & Abdurahman. (2014). Teknologi stabilisasi dimensi kayu. Laporan Hasil Penelitian. Bogor: Pusat Litbang Keteknikan Kehutanan dan Pengolahan Hasil Hutan.
Basri, E. & Balfas, J. (2014). Impregnasi ekstrak jati dan resin pada kayu jati cepat tumbuh dan karet. Jurnal Penelitian Hasil Hutan, 32 (4), 283-289.
Bowyer, J.L., Shmulsky, R. & J.G. Haygreen. (2007). Forest products & wood science: An introduction. (5th ed.). USA: Iowa State Press.
Esteves, B., Nunes, L. & Pereira, H. (2011). Properties of furfurylated wood (Pinus pinaster). European Journal of Wood and Wood Products 69, 521-525.
Hill, C.A.S. (2006). Wood modification: Chemical, thermal, and other processes. England: John Wiley & Sons, Ltd.
Hill, C.A.S. (2011). Wood modification: An update. Bioresources, 6 (2), 918-919.
Ibach, R.E. (2010). Specialty treatments. (Bab 19). Dalam Forest Products Laboratory [FPL] (Centennial edit.). Wood handbook: Wood as an engineering material. Wisconsin: Forest Product Society. (pp. 19.1- 19.14).
Iswanto, A.H., Fatriasari, W., Yunianti, A.D., Zailani, A. & Febrianto, F. (2013). Sifat fisis dan mekanis oriented strand board dari kayu terasetilasi. Jurnal Ilmu dan Teknologi Kayu Tropis, 11 (2), 184-191.
Khalil, H.P.S.A., Dungani, R., Mohammed, I.A., Hossain, M.S., Aprilia, N.A.S., Budiarso, S. & Rosamah, E. (2014). Determination of the Combined effect of chemical modification and compression of agatis wood on the dimensional stability, termite resistance, and morphological structure. Bioresources, 9 (4), 6614-6625.
Martawijaya, A., Kartasujana, I., Mandang, Y.I., Prawira, S.A. & Kadir, K. (2005). Atlas Kayu Indonesia Jilid I (Edisi revisi). Bogor: Pusat Penelitian dan Pengembangan Hasil Hutan.
Pandey, K.K, Jayashree & Nagaveni, H.C. (2009). Study of dimensional stability, decay resistance, and light stability of phenylisothiocyanate modified rubberwood. Bioresources, 4 (1), 257-267.
Panshin, A. J. & de Zeeuw, C. (1980). Textbook of wood technology. Iowa: McGraw-Hill Book Co.
Rowell, R.M. (2006). Acetylation. Forest Products Journal, 56 (9), 4-12.
Stamm, A.J. (1977). Dimensional stabilization of wood with furfuryl alcohol resin. Dalam Goldstein, I.S. (Ed.). Wood Technology: Chemical Aspects. Washington D.C: American Chemical Society. (pp. 141–149).
Steel, R.G.D., Torrie, J.H. & Dickey, D.A. (1997). Principles and Procedures of Statistics. A Biomaterial Approach (3rd ed). New York: Mc.Graw-Hill Book Company.
