SIFAT PAPAN PARTIKEL DAUR ULANG RENDAH EMISI FORMALDEHIDA
Main Article Content
Abstract
Formaldehyde emission and physical-mechanical properties of particleboard bonded with urea formaldehyde (UF) could have negative effects on human health, specially when used in a room with limited ventilation. To reduce formaldehyde emission, an adsorbent can be added into adhesive mixture. This report describes the effect of imposing active charcoal into urea formaldehyde adhesive in terms of formaldehyde emission, physical-mechanical changes and economic aspect of the recycled particleboard. Results showed that the addition of active charcoal in particleboard production significantly changed the product properties. The charcoal addition as much as 3% to the UF adhesive could reduce formaldehyde emission and improve physical-mechanical properties of particleboard, and meet the Indonesian and Japanese Standards. The addition of active charcoal into particleboard is financially feasible.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
CPSC.(1997). An update on formaldehyde: 1997. Revision. http://www.cpsc.gov. [27 Maret 2007].
Badan Standardisasi Nasional. (2000). Papan partikel. Standard Nasional Indonesia (SNI 03-210502000). Jakarta: Badan Standardisasi Nasional
Badan Standardisasi Nasional. (2006). Papan Partikel. Standard Nasional Indonesia (SNI 03-2105-2006). Jakar ta: Badan Standardisasi Nasional.
Dynea. (2005). Resin for ultra low formaldehyde emission according to the Japanese F**** quality. San Diego: Manfred Dunky.
Effendi, R. (2001). Kajian tekno-ekonomi industri MDF (Medium Density Fiberboard). Info Sosial Ekonomi. 2 (2), 103-112.
Haygreen, J.G & Bowyer, J.L. 1996. Hasil Hutan dan Ilmu Kayu: Suatu Pengantar (terjemahan). Yogyakarta: Gadjah Mada University Press.
Japan Industrial Standard [JIS]. (2003). Particleboard. JIS A 5908. Tokyo : Japanese Standards Association.
Liteplo, R.G., Beauchamp R., Meek M.E. & Chenier R. (2002). Formaldehyde. Concise International Chemical Assessment Document 40. Geneva: WHO.
Malik J. & A Santoso. (2006). Emisi formaldehida kayu lamina dari tiga jenis kayu hutan tanaman dengan perekat tanin, lignin dan fenol. Jurnal Nusa Kimia 6(1): 34-39.
Roffael, E, (1993). Transleted from German text and edited by K. C. Khoo, M. P. Koh & C.L. Ong. Formaldehyde Release From Particle Board and Other Wood Based Panel, Malaysia: Forest Research Institute Malaysia (FIRM) with technical assistance from Malaysia-German Forestry Research Project (GTZ).
Rong, H., Z: Ryu., J. Zheng, & Y. Zhang. (2002). Effect of air oxidation of rayon-based activated carbon fibers on the adsorption behavior for formaldehyde. Carbon 40: 2291-2300.
Santoso, A. & Sutigno, P. (2004). Pengaruh fumigasi amonium hidroksida terhadap emisi formaldehida kayu lapis dan papan partikel. Jurnal Penelitian Hasil Hutan. 22(1), 9 - 16.
Santoso, A., Hadi, YS. & Sutigno P. (2005). Pengaruh fumigasi dan penyemprotan amonia terhadap emisi formaldehida pada kayu lapis dan papan partikel. Jurnal Nusa Kimia 5(2), 36 - 41.
Santoso, A. & Pari, G. (2011). Teknik pencampur-an arang aktif pada ramuan perekat urea formaldehida. Laporan Hasil Penelitian. Bogor: Pusat Penelitian dan Pengembangan Keteknikan Kehutanan dan Pengolahan Hasil Hutan.
Sudjana. (2002). Desain dan Analisis Eksperimen. Bandung: Tarsito.
Wibowo, H., Khairul, M., Toto, R. & Ellyawan, A. (2008). Konduktivitas Termal Papan Partikel Sekam Padi. Jurnal Teknologi Technoscientia. Vol.1.
